Bio-Inspired Design and Related Publications

Our publications may also be searched, filtered, refined, and sorted by using our Publication Search Tool.

Takac, T., Pechan, T., Samajova, O., & Samaj, J. (2014). Integrative Chemical Proteomics and Cell Biology Methods to Study Endocytosis and Vesicular Trafficking in Arabidopsis. Plant Endosomes. Springer New York. DOI:10.1007/978-1-4939-1420-3_20.

Wang, B., Williams, L. N., Curry, A. L., & Liao, J. (2014). Preparation of Acellular Myocardial Scaffolds with Well-preserved Cardiomyocyte Lacunae, and Method for Applying Mechanical and Electrical Simulation to Tissue Construct. Cardiac Tissue Engineering Methods and Protocols. Springer Science. [Abstract]

Patnaik, S.S, Wang, B., Weed, B., Wertheim, J. A., & Liao, J. (2013). Chapter 3: "Decellularized Scaffolds: Concepts, Methodologies, and Applications in Cardiac Tissue Engineering and Whole-Organ Regeneration,". In Qing Liu (Ed.), Tissue Regeneration: Where Nanostructure Meets Biology. World Scientific Company. 77-124. [Abstract] [Document]

Simionescu, D. T., Chen, J., Jaeggli, M., Wang, B., & Liao, J. (2013). Form Follows Function: Advances in Trilayered Structure Replication for Aortic Heart Valve Tissue Engineering. In Ming Chyu (Ed.), Advances in Engineering for Surgery – from information-guided surgery to cell-based medicine. Multi-Science Publishing Company. 225-248. [Abstract]

Leedy, M. R., Martin, H. J., Norowski, P. A., Jennings, J. A., Haggard, W. O., & Bumgardner, J. D. (2011). Use of Chitosan as a Bioactive Implant Coating for Bone-Implant Applications. Advances in Polymer Science. Springer. 1-38.

Stella, J. A., Liao, J., Hong, Y., Merryman, W. D., Wagner, W. R., & Sacks, M. S. (2010). Tissue-to-cellular Deformation Coupling in Cell Microintegrated Elastomeric Scaffolds. In Garikipati, Krishna; Arruda, Ellen M. (Eds.), IUTAM Symposium on Cellular, Molecular and Tissue Mechanics, IUTAM Bookseries. Springer Netherlands. 16(2), 81-89. [Abstract] [Document] [Document Site]

Poudel, S., Marufuzzaman, M., Eksioglu, S., AmirSadegh, M., & French, W. (2015). Supply Chain Network Model for Biodiesel Production via Wastewaters from Paper and Pulp Companies. Handbook of Bioenergy. Springer International Publishing. 143-162. DOI:10.1007/978-3-319-20092-7_6. [Document Site]

Burgreen, GW, Soni, B., Hester, R., Thompson, D., Walters, K., & Walters, K. B. (2010). DigitalLung: Application of High-Performance Computing to Biological System Simulation. Advances in Computational Biology (Advances in Experimental Medicine and Biology). New York: Springer. 680, 573-584. [Abstract] [Document Site]

Mahtabi, M. J., Yadollahi, A., Rahmati, M., & Stone, T.W. (2018). Correlation Between Hardness and Loading Transformation Stress of Superelastic NiTi. Arabian Journal for Science and Engineering. Berlin Heidelberg: Springer. 1, 1-5. DOI:10.1007/s13369-018-3217-z. [Abstract]

Lee, N, Williams, L. N., Mun, S., Rhee, H., Prabhu, R., Bhattarai, K. R., & Horstemeyer, M. (2017). Stress Wave Mitigation at Suture Interfaces. Biomedical Physics & Engineering Express. IOP Publishing Ltd. 3, 035025. DOI:10.1088/2057-1976/aa777e. [Abstract] [Document] [Document Site]

Borse, M., Bhushan, S., Walters, K., & Burgreen, GW (2017). Numerical Simulations of Flow Pattern and Particle Trajectories in Feline Aorta for Hypertrophic Cardiomyopathy Heart Conditions. Engineering Application for Computational Fluid Mechanics. 6, 1-17. DOI:10.1080/19942060.2017.1339640.

Rush, G. A., Prabhu, R., Rush, G. A., III., Williams, L. N., & Horstemeyer, M. (2017). Modified Drop Tower Impact Tests for American Football Helmets. JoVE (Journal of Visualized Experiments). -(120), e53929-e53929. DOI:10.3791/53929. [Abstract] [Document Site]

Deang, J., Allison, P., Prabhu, R., Williams, L. N., Rhee, H., Whittington, W. R., Perkins, E. J., Bruce, S. M., & Horstemeyer, M. (2017). Constitutive Behaviour of Paddlefish (Polyodon Spathula) Cartilage. Bioinspired, Biomimetic and Nanobiomaterials. Thomas Telford Ltd. -, 1-8. DOI:10.1680/jbibn.16.00046. [Abstract] [Document Site]

Poudel, S., Marufuzzaman, M., & Bian, L. (2016). A Hybrid Decomposition Algorithm for Designing a Multi-modal Transportation Network under Biomass Supply Uncertainty. Transportation Research Part E. Pergamon. 94, 1-25.

Pedros, P. B., Askari, O., & Metghalchi, H. (2016). Reduction of Nitrous Oxide Emissions from Biological Nutrient Removal Processes by Thermal Decomposition. Journal of Water Research. 106, 304-311. DOI:10.1016/j.watres.2016.10.007. [Abstract] [Document Site]

Hashemnejad, S. M., & Kundu, S. (2016). Strain Stiffening and Negative Normal Stress in Alginate Hydrogels. Journal of Polymer Science, Part B: Polymer Physics. Wiley. 54, 1767-1775. DOI:10.1002/polb.24081. [Abstract]

Emelogu, A. A., Marufuzzaman, M., Thompson, S.M., Shamsaei, N., & Bian, L. (2016). Additive Manufacturing of Biomedical Implants: A Feasibility Assessment via Supply-Chain Cost Analysis. Additive Manufacturing. Elsevier. 11, 97-113. DOI:10.1016/j.addma.2016.04.006.

Manda, P., Kushwaha, A. S., Kundu, S., Shivakumar, H. N., Jo, S. B., & Murthy, S. N. (2016). Delivery Of Ziconotide To Cerebrospinal Fluid Via Intranasal Pathway For The Treatment Of Chronic Pain. Journal of Controlled Release. Elsevier. 224, 69-76. DOI:10.1016/j.jconrel.2015.12.044. [Abstract] [Document Site]

Sterling, A. J., Torries, B. A., Shamsaei, N., & Thompson, S.M. (2016). Data Related to the Fatigue Behavior and Failure Mechanisms of Direct Laser Deposited Ti-6Al-4V with and without Heat Treatment. Data in Brief. Elsevier. 6(March), 970-973. DOI:10.1016/j.dib.2016.01.059. [Abstract]

Poudel, S., Marufuzzaman, M., & Bian, L. (2016). Designing a Reliable Biofuel Supply Chain Network Considering Link Failure Probabilities. Computers & Industrial Engineering. 91, 85–99. DOI:10.1016/j.cie.2015.11.002.

Mahtabi, M. J., Shamsaei, N., & Rutherford, B. A. (2015). Mean Strain Effects on the Fatigue Behavior of Superelastic Nitinol Alloys: An Experimental Investigation. Journal of Procedia Engineering. Elsevier. 133, 646–654. DOI:10.1016/j.proeng.2015.12.645. [Abstract]

Sierad, L. N., Shaw, E. L., Bina, A., Brazile, B. L., Patnaik, S.S, Simionescu, A., Liao, J., Movileanu, I., Harpa, M., & Simionescu, D. T. (2015). Functional Heart Valve Scaffolds Obtained by Complete Decellularization of Porcine Aortic Roots in a Novel Differential Pressure Gradient Perfusion System. Tissue Engineering Part C Methods. 21(12), 1284-1296. DOI:10.1089/ten.TEC.2015.0170. [Abstract] [Document Site]

Vasquez, E.S., Cunningham, J. L., McMahan, J. B., Simpson, C. L., & Walters, K. B. (2015). Front Cover. Journal of Materials Chemistry B. 3, 6393-6394. DOI:10.1039/C5TB90112J. [Document Site]

Li, W., Ma, G., Brazile, B. L., Li, N., Dai, W., Butler, J. R., Claude, A., Wertheim, J. A., Liao, J., & Wang, B. (2015). Investigating the Potential of Amnion-Based Scaffolds as a Barrier Membrane for Guided Bone Regeneration. Langmuir. 31(31), 8642-8653. DOI:10.1021/acs.langmuir.5b02362. [Abstract] [Document Site]

Clemmer, J., Prabhu, R., Chen, J., Colebeck, E., Priddy, L. B., McCollum, M., Brazile, B. L., Whittington, W. R., Wardlaw, J. L., Rhee, H., Horstemeyer, M., Williams, L. N., & Liao, J. (2015). Experimental Observation of High Strain Rate Responses of Porcine Brain, Liver, and Tendon. Journal of Mechanics in Medicine and Biology. 1650032, 1-14. DOI:10.1142/S0219519416500329. [Abstract] [Document Site]

Simsiriwong, J., Shrestha, R., Shamsaei, N., Lugo, M., & Moser, R. (2015). Effects of Microstructural Inclusions on Fatigue of Polyether Ether Ketone (PEEK). Journal of the Mechanical Behavior of Biomedical Materials. Elsevier. 51, 388-397. DOI:10.1016/j.jmbbm.2015.07.020. [Abstract] [Document Site]

Pirim, H., Eksioglu, B., & Perkins, A. (2015). B-MST: A Minimum Spanning Tree Based Heuristic for Clustering High Throughput Biological Data. Computers in Biology and Medicine. 62, 94-102.

Prabhu, R., Whittington, W. R., Patnaik, S. S., Mao, Y., Liao, J., Williams, L. N., Begonia, M., & Horstemeyer, M. (2015). A Coupled Experiment-Finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials. JoVE. Cambridge, MA: JoVE Corp.. 1(99), e51545. DOI:10.3791/51545. [Abstract]

Li, F., Li, X., Xang, J., Liao, J., Li, S., Liao, J., Prabhu, R., Williams, L. N., Yang, Y., Tang, J., & Liu, N. (2015). Direct Synthesis of Carbon-based Microtubes by Hydrothermal Carbonization of Microorganism Cells. Chemical Engineering Journal. Amsterdam, Holland: Elsevier. 276, 322-330. DOI:10.1016/j.cej.2015.04.091.

Lee, C. H., Zhang, W., Liao, J., Carruthers, C. A., Sacks, J. I., & Sacks, M. S. (2015). On the Presence of Affine Fibril and Fiber Kinematics in the Mitral Valve Anterior Leaflet. Biophysical journal. 108(8), 2074-2087. DOI:10.1016/j.bpj.2015.03.019. [Abstract] [Document Site]

Brazile, B. L., Wang, B., Wang, G., Bertucci, R., Prabhu, R., Patnaik, S.S, Butler, J. R., Claude, A., Brinkman-Ferguson, E., Williams, L. N., & Liao, J. (2015). On the Bending Properties of Porcine Mitral, Tricuspid, Aortic, and Pulmonary Valve Leaflets. Journal of Long-Term Effects of Medical Implants. 25(1-2), 1-14. [Abstract] [Document Site]

Rowe, M., Eyiler, E., & Walters, K. B. (2014). Nanomechanical Properties of Poly(trimethylene Malonate) and Poly(trimethylene Itaconate) During Hydrolytic Degradation. Journal of Applied Polymer Science. 131(22), 41069. DOI:10.1002/APP.41069. [Document Site]

Pietsch, R., Wheatley, B. B., Donahue, T. L., Gilbrech, R., Prabhu, R., Liao, J., & Williams, L. N. (2014). Anisotropic Compressive Properties of Passive Porcine Muscle Tissue. Journal of Biomechanical Engineering. Two Park Avenue New York, NY 10016-5990. USA: ASME. 136(11), 111003.

Weed, B. C., Bova, T. L., Patnaik, S. S., Brazile, B., Mochal-King, C., Rude, B., Prabhu, R., Williams, L. N., & Liao, J. (2014). 3D Printing Assisted Rapid Prototyping and Optimization: Development of a Novel Small Intestinal Cannula for Equine Research. 3D Printing and Additive Manufacturing. 140 Huguenot Street, 3rd Floor New Rochelle, NY 10801-5215. USA: Mar Ann Liebert Publications. 1(2), 104-106. DOI:10.1089/3dp.2013.0008.

Rhee, H., Tucker, M. T., Whittington, W. R., Horstemeyer, M., & Lim, H. (2014). Structure-property Responses of Bio-inspired Synthetic Foams at Low and High Strain Rates. Science and Engineering of Composite Materials. 22(4), 365-373. DOI:10.1515/secm-2013-0238.

Thompson, S.M., & Ma, H. B. (2014). Thermal Spreading Analysis of Rectangular Heat Spreaders. Journal of Heat Transfer. ASME. 136(6), 064503. DOI:10.1115/1.4026558. [Abstract]

Freed, A. D., Liao, J., & Einstein, D. R. (2014). A Membrane Model from Implicit Elasticity Theory: Application to Visceral Pleura. Biomechanics and Modeling in Mechanobiology. 13(4), 871-881. DOI:DOI 10.1007/s10237-013-0542-8. [Abstract] [Document] [Document Site]

Myles, V., Liao, J., & Warnock, J. (2014). Cyclic Pressure and Angiotensin II Influence the Biomechanical Properties of Aortic Valves. Journal of Biomechanical Engineering. ASME. 136(1), 011011. DOI:10.1115/1.4026041. [Abstract] [Document Site]

Johnson, K. L., Trim, W., Williams, L. N., Liao, J., Horstemeyer, M., & Prabhu, R. (2013). Geometric Effects on Stress Wave Propagation. ASME Journal of Biomechanical Engineering. New York, NY: ASME. 2(136), 021023. DOI:10.1115/1.4026320. [Abstract] [Document Site]

Walters, K., Bhushan, S., Alam, M. F., & Thompson, D. (2013). Investigation of a Dynamic Hybrid RANS/LES Modelling Methodology for Finite-Volume CFD Simulations. Flow, Turbulence and Combustion. 91(3), 643-667. DOI:10.1007/s10494-013-9481-9. [Abstract]

Wang, B., Wang, G., To, F., Butler, J. R., Claude, A., McLaughlin, R. M., Williams, L. N., Curry, A. L., & Liao, J. (2013). Myocardial Scaffold-based Cardiac Tissue Engineering: Application of Coordinated Mechanical and Electrical Stimulations. Langmuir. 29(35), 11109-17. DOI:10.1021/la401702w. Epub 2013 Aug 20.. [Abstract] [Document] [Document Site]

Eksioglu, S., Palak, G., Greenwood, A., & Mondala, A. (2013). Supply Chain Design and Management for Biocrude Production Via Wastewater Treatment. Journal of Environmental Progress and Sustainable Energy. 32(1), 139-147. DOI:10.1002/ep.10605/pdf.

Mercuri, J., Patnaik, S.S, Dion, G., Gill, S., Liao, J., & Simionescu, D. T. (2013). Regenerative Potential of Decellularized Porcine Nucleus Pulposus Hydrogel Scaffolds; Stem Cell Differentiation, Matrix Remodeling and Biocompatibility Studies. Tissue Engineering Part A. 19(7-8), 952-66. DOI:10.1089/ten.TEA.2012.0088. Epub 2013 Jan 8.. [Abstract] [Document] [Document Site]

Vangalai, K., Siriwardana, K., Vasquez, E. S., Xin, Y., Pittman, C. U., Walters, K. B., & Zhang, D. (2013). Simultaneous and Sequential Protein and Organothiol Interactions with Gold Nanoparticles. The Journal of Physical Chemistry C. ACS Publications. 117(3), 27146-27154. DOI:10.1021/jp310085u. [Abstract] [Document] [Document Site]

Pirim, H., Eksioglu, B., Perkins, A., & Yuceer, C. (2012). Clustering of High Throughput Biological Data. Computers and Operations Research. 39(12), 3046-3061.

Wang, B., Tedder, M. E., Perez, C. E., Wang, G., Curry, A. L., To, F., Elder, S., Williams, L. N., Simionescu, D. T., & Liao, J. (2012). Structural and Biomechanical Characterizations of Porcine Myocardial Extracellular Matrix. Journal of Materials Science - Materials in Medicine. 23(8), 1835-47. DOI:10.1007/s10856-012-4660-0. [Abstract] [Document] [Document Site]

Simionescu, D. T., Chen, J., Jaeggli, M., Wang, B., & Liao, J. (2012). Form Follows Function: Advances in Trilayered Structure Replication for Aortic Heart Valve Tissue Engineering. Journal of Healthcare Engineering. 3(2), 179-202. DOI:10.1260/2040-2295.3.2.179. [Abstract] [Document] [Document Site]

Liao, J., Joyce, E. M., Merryman, D. W., Jones, H. L., Tahai, M., Horstemeyer, M., Williams, L. N., Hopkins, R. A., & Sacks, M. S. (2012). The Intrinsic Fatigue Mechanism of the Porcine Aortic Valve Extracellular Matrix. Cardiovascular Engineering and Technology. 3(1), 62-72. DOI:10.1007/s13239-011-0080-4. [Abstract] [Document] [Document Site]

Naske, C. D., Polk, P. P., Speed, J. L., Holmes, W., & Walters, K. B. (2012). Postcondensation Filtration of Pine and Cottonwood Pyrolysis Oil and Impacts on Accelerated Aging Reactions. Energy & Fuels. ACS Publications. 26(2), 1284-1297. DOI:10.1021/ef200541d. [Abstract] [Document Site]

Shoemaker, N., Gibson, C. M., Polk, A. C., Krishnan, S. R., & Srinivasan, K. K. (2011). Performance and emissions characteristics of bio-diesel (B100)-ignited methane and propane combustion in a four cylinder turbocharged compression ignition engine. Journal of Engineering for Gas Turbines and Power. Trans. ASME. 134(8), 10. DOI:10.1115/1.4005993.

Grande-Allen, K. J., & Liao, J. (2011). The Heterogeneous Biomechanics and Mechanobiology of the Mitral Valve: Implications for Tissue Engineering. Current Cardiology. 13(2), 113-120. [Abstract] [Document Site]

Guan, J., Wang, F., Li, Z., Chen, J., Guo, X., Liao, J., & Moldovan, N. (2011). The Stimulation of the Cardiac Differentiation of Mesenchymal Stem Cells in Tissue Constructs That Mimic Myocardium Structure and Biomechanics. Biomaterials. 32(24), 5568-80. [Abstract] [Document] [Document Site]

Borazjani, A., Weed, B., Patnaik, S.S, Feugang, J., Christiansen, D., Elder, S., Ryan, P., & Liao, J. (2011). A Comparative Biomechanical Analysis of Term Fetal Membranes in Human and Domestic Species. American Journal of Obstetrics and Gynecology. Feb 2011, 204. [Document Site]

Tedder, M. E., Simionescu, A., Chen, J., Liao, J., & Simionescu, D. (2011). Assembly and Testing of Stem Cell-seeded Layered Collagen Constructs for Heart Valve Tissue Engineering. Tissue Engineering Part A. 17(1-2), 25-36. DOI:10.1089/ten.tea.2010.0138. [Abstract] [Document Site]

Pirim, H., Gautam, D., Bhowmik, T., Perkins, A., Eksioglu, B., & Alkan, A. (2011). Performance of an Ensemble Clustering Algorithm on Biological Data Sets. Mathematical and Computational Applications. 16(1), 87-96.

Han, F. X., King, R., Lindner, J., Yu, T. Y., Durbha, S. S., Younan, N. H., Su, Y., Luthe, J. C., & Plodinec, J. M. (2011). Nutrient Fertilizer Requirements for Sustainable Biomass Supply to Meet U.S. Bioenergy Goal. Biomass and Bioenergy. Elsevier. 35, 253-262.

Martin, H. J., Schulz, K., & Walters, K. B. (2010). Piranha Treated Titanium Compared to Passivated Titanium as Characterized by XPS. Surface Science Spectra. American Vacuum Society. 15(1), 23-30. [Abstract] [Document Site]

Sierad, L. N., Simionescu, A., Albers, C., Maivelett, J., Tedder, M. E., Liao, J., & Simionescu, D. T. (2010). Design and Testing of a Pulsatile Conditioning System for Dynamic Endothelialization of Polyphenol-Stabilized Tissue Engineered Heart Valves. Cardiovascular Engineering and Technology. 1(2), 138-153. [Abstract] [Document Site]

McKittrick, J., Chen, P. Y., Tombolato, L., Novitskaya, E. E., Trim, W., Hirata, G. A., Olevsky, E. A., Horstemeyer, M., & Meyers, M. A. (2010). Energy Absorbent Natural Materials and Bioinspired Design Strategies: A Review. Materials Science and Engineering C. 30(3), 331-342. [Document]

Warnock, J., Gamez, C. P., Metzler, S., Chen, J., Elder, S., & Liao, J. (2010). Vasoactive Agents Alter the Biomechanical Properties of Aortic Heart Valve Learlets in a Time-dependent Manner. JOURNAL OF HEART VALVE DISEASE. 19(1), 86-96. [Abstract] [Document Site]

Rhee, H., Horstemeyer, M., Youngkeun, H., Lim, H., El Kadiri, H., & Trim, W. (2009). A Study on the Structure and Mechanical Behavior of the Terrapene Carolina Carapace: A Pathway to Design Bio-Inspired Synthetic Composites. Materials Science and Engineering C. 29(8), 2333-2339.

Gottlieb, R., Shu, F., Wu, Z., Kameneva, M., Burgreen, GW, & Antaki, J. (2009). Liquid Crystal Shear Stress Sensor for Blood and Other Opaque Viscous Fluids. Experiments in Fluids. Journal of Flow Visualization & Imaging. 15, 51-71.

Tedder, M. E., Liao, J., Weed, B., Stabler, C., Zhang, H., Siminonescu, A., & Siminonescu, D. T. (2009). Stabilized Acellular Pericardium: Novel Collagen Scaffold for Heart Valve Tissue Engineering. TISSUE ENGINEERING Part A. 15(6), 1257-1268. [Abstract]

Horstemeyer, M., & El Kadiri, H. (2009). Jurassic Radiolarite Pulses, from the Dorsale Calcaire (Internal Rif, Morrocco): A Clue for Correlating and Interpreting the Tethyan Radiolarites. Stratigraphy. Micropaleontology Press. 6(4), 137-156. [Abstract]

Mondala, A., Liang, K., Toghiani, H., Hernandez, R., & French, W. (2009). Biodiesel Production by in Situ Transesterification of Municipal Primary and Secondary Sludges. 100(3), 1203-1210.

Williams, L. N., Elder, S., & Horstemeyer, M. (2008). Experimental Investigations of Anisotropic Shear Properties of Rabbit Petallar Tendons. In BE Journal Ed. Board (Eds.), Biological Engineering Journal. ASABE Publications. 1, 255-64. [Abstract]

Williams, L. N., Elder, S., & Horstemeyer, M. (2008). Variation of Diameter Distribution, Number Density, and Area Fraction of Fibrils within Five Areas of the Rabbit Patellar Tendon. In BE Journal Ed. Board (Eds.), Annals of Anatomy. Annals of Anatomy. 190, 442-451. [Abstract]

Theel, H. J., Dibble, E. D., & Madsen, J. D. (2008). Differential Influence of a Monotypic and Diverse Native Aquatic Plant Bed on a Macroinvertebrate Assemblage; an Experimental Implication of Exotic Plant Induced Habitat. Hydrobioologia. 600, 77-87.

Han, F. X., Shiyab, S., Chen, J., Su, Y., Monts, D., Waggoner, C., & Matta, F. (2008). Extractability and Bioavailability of Mercury from a Mercury Sulfide Contaminated Soil from Oak Ridge, Tennessee, USA. Water, Air and soil Pollution. (194), 67-75.

Stella, J., Liao, J., & Sacks, M. S. (2007). Time-dependent Biaxial Mechanical Behavior of the Aortic Heart Valve Leaflet. Journal of Biomechanics. 40(14), 3169-3177. DOI:10.1016/j.jbiomech.2007.04.001. [Abstract]

Zhang, J., Toghiani, H., Mohan, D., Pittman, C., & Toghiani, R.K. (2007). Product Analysis and Thermodynamic Simulations from the Pyrolysis of Several Biomass Feedstocks. Energy & Fuels. 21, 2373-2385.

Merryman, W. D., Liao, J., Parekh, A., Candiello, J. E., Lin, H., & Sacks, M. S. (2007). Differences in Tissue-remodeling Potential of Aortic and Pulmonary Heart Valve Interstitial Cells. Tissue engineering. 13(9), 2281-2289. DOI:10.1089/ten.2006.0324. [Abstract]

Fernando, S., Karra, P., Hernandez, R., & Jha, S. K. (2007). Effect of Incompletely Converted Soybean Oil on Biodiesel Quality. Energy.

Hernandez, R., Jeffreys, T., Marwaha, A., Thomas, M., & Woods, M. (2006). Plant Design Project: Biodiesel Production Using Acid Catalyzed Transesterification of Yellow Grease. Journal of Chemical Engineering Education. 40(3).

Schrefler, B. A., Cao, T. D., Favia, P., Pesavento, F., & Hussain, F. (2018). Dynamics of Fracturing Saturated Porous Media. 10th European Solid Mechanics Conference. Bologna, Italy. [Abstract]

Robinson, B. M., Bhushan, S., & Rush, S. (2017). Advanced Analytical Techniques: Exploring Aquatic Animal Ecology Through Isotopes and Biofluid Analysis. Mississippi Academy of Sciences, Eighty First Annual Meeting. Hattiesburg, MS. 62(1), 119.

Poudel, S., Quddus, M. A., Marufuzzaman, M., Chowdhury, S., Smith, B. K., & Bian, L. (2016). Designing a Reliable and Congested Multi-modal Facility Location Problem for Bio-fuel Supply Chain Network. INFORMS Annual Meeting. Nashville, TN.

Emelogu, A. A., Chowdhury, S., Marufuzzaman, M., & Bian, L. (2016). Additive Manufacturing in a Biomedical Supply Chain: A Continuous Approximation Approach. INFORMS Annual Meeting. Nashville, TN.

Borse, M., Bhushan, S., & Walters, K. (2016). TURBULENT FLOW SIMULATIONS OF AORTIC THROMBOEMBOLISM IN FELINE HYPERTROPIC CARDIOMYOPATHY (HCM). Journal of the Mississippi Academy of Sciences. University of Southern Mississippi. 61(1), 148-148.

Zhang, L., & Walters, K. B. (2015). Alcohol Stabilization of Bio-Oils during High Temperature Treatment. 2015 AIChE Annual Meeting. Salt Lake City, UT.

Bian, L., Marufuzzaman, M., & Poudel, S. (2015). Designing a Reliable Bio-fuel Supply Chain Network Considering Link Failure Probabilities. INFORMS Annual Meeting. Philadelphia, PA.

Poudel, S., Bian, L., Marufuzzaman, M., & Medal, H. (2015). Designing a Dynamic Multimodal Transportation Network Under Biomass Supply Uncertainty. INFORMS Annual Meeting. Philadelphia, PA.

Sloan, P. B., Swiderski, C. E., Elder, S., Smith, D. R., Wang, M., Kumar, T. K., & Bowser, J. E. (2015). Tensile Properties of Canon Bones of Quarter Horses with Hereditary Equine Regional Dermal Asthenia (HERDA). 2015 Merial-NIH Veterinary Scholars Symposium. Davis, CA.

Brazile, B. L., Butler, J. R., Patnaik, S.S, Xu, Y., Claude, A., Prabhu, R., Williams, L. N., Zhang, G., Guan, J., & Liao, J. (2014). Biomechanical Characterizations of Scar ECM During the Acute to Chronic Stages of Myocardial Infarction. Biomedical Engineering Society Annual Conference. San Antonio, TX.

Patnaik, S.S, Butler, J. R., Brazile, B. L., Weed, B., Dandolu, V., Christiansen, D., Ryan, P., & Liao, J. (2014). Comparison of Microstructural, Biomechanical, and Suture Retention Strength of Ovine Vaginal Patches Obtained from Three Types of Decellularization Protocols. Biomedical Engineering Society Annual Conference. San Antonio, TX.

Weed, B., Patnaik, S.S, Prabhu, R., Liao, J., & Williams, L. N. (2014). Orthogonal Mechanical Properties of Porcine Lung Tissue. World Congress of Biomechanics. Boston, MA.

Williams, L. N., Patnaik, S.S, Taylor, K., Liao, J., & Prabhu, R. (2014). Effect of Frequency and Loading Dependency on the Dynamic Viscoelastic Properties of Porcine Patellar Tendon Tissues. World Congress of Biomechanics. Boston, MA.

Lee, N, Horstemeyer, M., Rhee, H., Liao, J., & Williams, L. N. (2014). Multiscale Structural and Mechanics Study of the Red Billed Woodpecker Beak. TMS. San Diego, CA.

Patnaik, S., Brazile, B., Weed, B., Christiansen, D., Ryan, P., & Liao, J. (2013). Structural Analysis of Decellularized Vaginal Tissues. American Urogynecologic Society Annual Scientific Meeting. Las Vegas, Nevada: American Urogynecologic Society.

Patnaik, S., Brazile, B., Weed, B., Lawrence, A., Christiansen, D., Ryan, P., & Liao, J. (2013). Mechanical and Ultrastructural Analyses of Decellularized Sheep Vaginal Tissues. Southeastern Microscopy Society 2013 Meeting. Greenville, South Carolina: Southeastern Microscopy Society.

Liao, J., & Guan, J. (2013). Trilayered Design in Aortic Valve Tissue Engineering: A Polymeric Approach. Society For Biomaterials Annual Meeting & Exposition. Boston, Massachusetts: Society For Biomaterials.

Patnaik, S.S, Weed, B. C., Borazjani, A., Wang, B., Brazile, B., Williams, L. N., Damaser, M., & Liao, J. (2012). Characterization of Nonlinear Anisotropic Mechanical Properties of Sheep Vaginal Wall Tissue. Biomedical Engineering Society Annual Conference. Atlanta, GA: BMES.

Oyeka, O., Patnaik, S.S, Grewal, H., Asafa, O., Liao, J., & Williams, L. N. (2012). Role of Bone Mineral in Physical and Microstructural Characteristics of Cortical Bone. Biomedical Engineering Society Annual Conference. GA, October: BMES.

Weed, B. C., Patnaik, S.S, Borazjani, A., Williams, L. N., & Liao, J. (2012). Comparison of Longitudinal and Transverse Biomechanical Response of Sheep Vaginal Tissues. American Urogynecologic Society (AUGS) Annual Scientific Meeting. Chicago, IL.

Wang, B., Perez, C. E., White, A. S., To, F., Curry, A. L., & Liao, J. (2012). Myocardial Scaffold-based Cardiac Tissue Engineering: Application of Coordinated Mechanical and Electrical Stimulations. 9th World Biomaterials Congress. Chengdu, China.

Patnaik, S.S, Babski-Reeves, K., & Strawderman, L. (2008). Human Systems & Engineering Laboratory. Proceedings of 52 Annual Meeting of Human Factors and Ergonomics Society (HFES). New York City, NY. [Abstract] [Document]

Crawford, F., Fisher, J., AbuOmar, O., & Prabhu, R. (2018). A Multivariate Linear Regression Analysis of In Vitro Testing Conditions and Brain Biomechanical Response under Shear Loads. Proceedings of the 2018 International Conference on Data Science. Las Vegas, NV.

Robinson, B. M., Bhushan, S., & Rush, S. (2018). Exploring Aquatic Animal Ecology Through Isotopes And Biofluid Analysis. Mississippi Academy of Sciences, Eighty First Annual Meeting. University of Southern Mississippi.

Khalid, G. A., Jones, M. D., Prabhu, R., Mason-Jones, A., Whittington, W. R., Bakhtiarydavijani, H., & Theobald, P. S. (2017). Development of a Paediatric Head Model for the Computational Analysis of Head Impact Interactions. Development. International Journal of Mathematical, Computational, Physical, Electrical and Computer Engineering: World Academy of Science, Engineering and Technology. 11(3), 113-116. [Abstract]

King, R., & Prabhu, R. (2017). Data Mining the Effects of Testing Conditions on Brain Biomechanical Properties. Proceedings of the 2017 International Conference on Data Mining. Las Vegas, NV.

Mahtabi, M. J., Shamsaei, N., & Rutherford, B. A. (2015). Mean Strain Effects on the Fatigue Behavior of Superelastic Nitinol Alloys: An Experimental Investigation. 6th International Conference on Fatigue Design. Senlis, France. [Abstract]

Wang, X., Walters, K., Burgreen, GW, & Thompson, D. (2015). Cyclic Breathing Simulations: Pressure Outlet Boundary Conditions Coupled with Resistance and Compliance. ASME-JSME-KSME Joint Fluids Engineering Conference, Paper AJKFluids2015-26569. Seoul, Korea. DOI:10.1115/AJKFluids2015-26569. [Abstract]

Weeks, A., Vasquez, E.S., Walters, K. B., & Janorkar, A. (2015). Aminated Elastin-like Polypeptide Coatings for Liver Cell Culture. Proceedings for the Society for Biomaterials (SFB) Annual Meeting and Exposition. Charlotte, NC: Society for Biomaterials (SFB). 38.

Lee, N, Prabhu, R., Williams, L. N., & Horstemeyer, M. (2014). The Role of the Hyoid Apparatuses of Woodpeckers for Energy Dissipation. Southern Biomedical Engineering Conference. Gulfport, MS.

Johnson, K. L., Trim, W., Horstemeyer, M., Williams, L. N., Liao, J., & Prabhu, R. (2013). Examination of the Geometric Effects on Stress Wave Propagation and Applications in Football Helmet Design. Proceedings of the ASME Summer Bioengineering Conference. Sunriver, OR: ASME SBC.

Thompson, S.M., & Ma, H. B. (2013). Effect of Area Ratio on Thermal Spreading Resistance of a Cubic Heat Spreader. ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. Minneapolis, MN: ASME. 3, V003T10A018. DOI:10.1115/HT2013-17321. [Abstract]

Walters, K., Burgreen, GW, Hester, R. L., Thompson, D., Lavallee, D., Pruett, W. A., & Ford-Green, J. (2012). Simulations of Cyclic Breathing in the Conducting Zone of the Human Lung. Proceedings of the ASME Fluids Engineering Division Summer Meeting. Rio Grande, Puerto Rico.

Patnaik, S.S, Weed, B. C., Borazjani, A., Bertucci, R., Begonia, M., Wang, B., Williams, L. N., & Liao, J. (2012). Biomechanical Characterization of the Sheep Vaginal Wall Tissue: A Potential Application in Human Pelvic Floor Disorders. Proceedings of ASME Summer Bioengineering Conference. Fajarado, Puerto Rico: ASME.

Simionescu, D. T., Jaeggli, M., Liao, J., & Simionescu, A. (2012). Scaffolds and Stem Cells for Patient-Tailored Aortic Heart Valve Tissue Engineering. QScience Proceedings: Heart Valve Biology and Tissue Engineering. Mykonos, Greece. 2012, 76. DOI:10.5339/qproc.2012.heartvalve.4.76. [Abstract] [Document Site]

Myles, V., Liao, J., & Warnock, J. (2012). Pressure and Angiotensin II Influence the Mechanical Properties of Aortic Valves. QScience Proceedings: Heart Valve Biology and Tissue Engineering. Mykonos, Greece. 2012, 41. DOI:10.5339/qproc.2012.heartvalve.4.41. [Abstract] [Document Site]

Rowe, M., Eyiler, E., Chu, I. W., & Walters, K. B. (2012). Effects of Hydrolytic Degradation on the Mechanical Properties of Renewable Bioplastics: Poly(trimethylene malonate) and Poly(trimethylene itaconate). Proceedings of ANTEC - Society of Plastics Engineers (SPE). Orlando, FL.

Rowe, M., Eyiler, E., & Walters, K. B. (2011). pH and Time Dependent Hydrolytic Degradation of Bioplastics from Renewable Monomers. ANTEC - Society of Plastics Engineers (SPE) 2011. Boston, MA. 69, 306-311.

Pirim, H., Gautam, D., Bhowmik, T., Perkins, A., Eksioglu, B., & Alkan, A. (2010). Performance of an Ensemble Clustering Algorithm on Biological Data Sets. Proceedings of International Symposium on Computing in Science and Engineering. Aydin, Turkey.

Rowe, M., & Walters, K. B. (2009). Synthesis and Characterization of Bioplastics from Polyfunctional Renewable Monomers. Proceedings of ANTEC - Society of Plastics Engineers (SPE). ANTEC of the Society of Plastics Engineers (SPE), Chicago, IL: SPE. 2009.

Begonia, M., Liao, J., Horstemeyer, M., & Williams, L. N. (2009). Strain Rate Dependence In The Structure Property Relationship Of Porcine Brain Session Name: Injury Mechanics. ASME 2009 Summer Bioengineering Conference Proceedings. Lake Tahoe, CA.

Pirim, H., & Eksioglu, B. (2009). An Axiomatic Design for Modeling Biological Systems. Proceedings of the International Conference on Axiomatic Design. Lisbon, Portugal.

Antonyraj, A., Park, S. J., Thibaudeau, G., German, R., & Baldwin, B. (2008). Development and Analysis of Bio-Inspired Design Aluminum Composites. PM 2008 World Congress on Powder Metallurgy & Particulate Materials. Washington, DC.

Xue, Y., & Wang, K. (2008). Micromechanical Simulations on Hygro-Mechanical Properties of Bio-Fiber Composites. Proceeding of 2008 MRS Spring Meeting. San Francisco, CA.

Patnaik, S.S, McGinley, J., Babski-Reeves, K., Carruth, D. W., & McFadyen, G. (2008). Biomechanical Validation of Digital Human Models: A Posture and Motion Study with Digital Human Models. Proccedings of Institute of Biological Engineering Conference. Chapel Hill, NC. [Abstract] [Document]

Han, F. X., Shiyab, S., Su, Y., Monts, D., Waggoner, C., & Matta, F. (2007). Bioavailability and Stability of Mercury Sulfide in Armuchee(USA) Soils. 11th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM'07), Bruges, Belgium.

Young, M., Molen, M., Oglesby, D., Crawford, K., Walp, K., Whitt, C., Lewis, R., & Phillips, S. (2007). The Design and Development of a Through-the-Road Parallel Diesel Electric Hybrid. IEEE VPPC 07 Arlington, TX: IEEE. [Abstract] [Document]

Xue, Y., Solanki, K.N., Steele, G., & Horstemeyer, M. (2007). Quantitative Uncertainty Analysis for a Mechanistic Multistage Fatigue Model . Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2007-1982 . Honolulu, Hawaii. [Abstract]

Han, F. X., Shiyab, S., Su, Y., Monts, D., Waggoner, C., & Matta, F. (2007). Stability and Bioavailability of Mercury Sulfide in Oak Ridge Soils. 33rd.

King, R., Poston, D. H., Wasson, L. L., & Givens, W. A. (2005). A Comprehensive Threat Management Framework for a Crop Biosecurity National Architecture. Proceedings of the IEEE International Geoscience and Remote Sensing Symposium. Seoul, Korea. 1, 2105-2108. [Document]

German, R., Suri, P., Blaine, D., & Campbell, L. (2004). Sintered Tolerances and the Concomitant Demands on Green Body Homogeneity. Advances in Powder Metallurgy and Particulate Materials - 2004, Part 5. Princeton, NJ: Metal Powder Industries Federation. 1-10. [Abstract] [Document]

Burnett, G. E., & Mazzola, M. (2001). Pulsed Acoustic Biofouling Inhibition. 2001 IEEE Pulsed Power Plasma Science Coference. Las Vegas, Nevada. 460.

Kumari, S., Cook, C., Varadarajan, A., & Walters, K. B. (2015). CZF@PNIPAM as a Temperature Responsive Material for Biomedical Applications. 3rd Annual APTEC November meeting. Tulane University, New Orleans, LA.

Brazile, B. L., Patnaik, S.S, Vaart, C. H., Damaser, M., & Liao, J. (2015). Regional Biomechanical Properties of Sheep Broad Ligament Tissues. AUGS Annual Scientific Meeting. Seattle, WA.

Patnaik, S.S, Butler, J. R., Brazile, B. L., Dandolu, V., Ryan, P. L., Christiansen, D., & Liao, J. (2015). Comparative Study of the Tensile Strength of Commonly Utilized Suture Knots. AUGS Annual Scientific Meeting. Seattle, WA.

Brazile, B. L., Patnaik, S.S, Lin, S., Shi, X., Prabhu, R., Rhee, H., Williams, L. N., & Liao, J. (2015). Biomechanical Characterization of Porcine Skeletal Muscle Extracellular Matrix. Biomedical Engineering Society Annual Meeting. Tampa, FL.

Wu, J., Brazile, B. L., Liao, J., & Hong, Y. (2015). Electrospun Loose-fiber Polyurethane Scaffolds for Tissue Engineering Applications. Biomedical Engineering Society Annual Meeting. Tampa, FL.

Kumari, S., Cook, C., & Walters, K. B. (2015). CZF@PNIPAM as Temperature Responsive Material for Biomedical Applications. SMATDAP 2015 Annual Review Symposium. Tulane University, New Orleans, LA.

Brazile, B. L., Butler, J. R., Patnaik, S.S, Xu, Y., Claude, A., Prabhu, R., Williams, L. N., Guan, J., & Liao, J. (2015). Biomechanical Characterizations of Scar ECM During the Acute to Chronic Stages of Myocardial Infarction. Summer Biomechanics, Bioengineering, and Biotransport Conference. Snowbird, UT.

Brazile, B. L., Patnaik, S.S, Lin, S., Shi, X., Liao, S., Prabhu, R., Rhee, H., Williams, L. N., Guan, J., & Liao, J. (2015). Biomechanical Characterization of Porcine Skeletal Muscle Extracellular Matrix. Summer Biomechanics, Bioengineering, and Biotransport Conference. Snowbird, UT.

Patnaik, S. S., Szasz, T., Prabhu, R., Rhee, H., Horstemeyer, M., Liao, J., & Williams, L. N. (2015). Dynamic Viscoelastic Properties of Porcine Patellar Tendon Tissue: A Study of Regional Variation and Frequency Dependent Behavior. Summer Biomechanics, Bioengineering, and Biotransport Conference. Snowbird, UT.

Bertucci, R., Prabhu, R., Horstemeyer, M., Liao, J., & Williams, L. N. (2015). Finite Element Analysis of Lower Extremity Military Boot Protection at Blast Condition. Summer Biomechanics, Bioengineering, and Biotransport Conference. Snowbird, UT.

Oje, A., Lee, N, & Williams, L. N. (2011). The Effect of Water on the Microstructure and Mechanics of the Bone. Biomedical Engineering Society. Hartford, CT.

Salkeld, S., Bridges, S., Steele, C., & Lawrence, M. L. (2009). Comparison and Clustering of Blast Results to Test the Distributed-Genome Hypothesis Using Biopython. Midsouth Computational Biology and Bioinformatics Society (MCBIOS) Annual Meeting. Mississippi State University, Starkville, MS.

Patel, R., Riveros, G., & Thompson, D. (2017). Fundamentals of Load Transfer Mechanisms in Biostructures: A Complex Network Approach. Journal of the Mississippi Academy of Sciences (Proceedings of the 81st Annual Meeting of the Mississippi Academy of Sciences). Hattiesburg, MS. 62(1), 115.

Patel, R., Riveros, G., Hoover, J., Perkins, E., & Thompson, D. (2016). Early Detection of Failure Mechanisms in Resilient Bio-Structures: A Complex Network Study. SIAM Workshop on Network Science 2016, July 15-16, 2016. Boston, MA,.

Pirim, H. (2007). Biological Cell's Production System. INFORMS Annual Meeting. Seattle, WA.

Patel, R., Thompson, D., & Riveros, G. (2017). Fundamentals of Load Transfer Mechanisms in Biostructures: A Complex Network Approach. 33rd Annual Southern Biomedical Engineering Conference. Gulfport, MS.

Wang, Z., Srinivasan, K. K., Krishnan, S. R., & Som, S. (2012). A Computational Investigation of Diesel and Biodiesel Combustion and NOx Formation in a Light-duty Compression Ignition Engine. Spring Technical Meeting of the Central States Section of the Combustion Institute. Dayton, OH.

Tiruveedhula, M. P., Fan, J., Sadasivuni, R., Durbha, S. S., & Evans, D. L. (2009). Biomass and Health-based Forest Cover Delineation Using Spectral Un-mixing. Proceedings of the ASPRS 2009 Conference. Baltimore, MD. [Document]

Vasquez, E.S., Duggan, E., Metcalf, J., Kundu, S., & Walters, K. B. (2015). Surface and Rheological Effects of Mucus/Mucin Coupled with Chitosan-Coated Gold Nanoparticles. AIChE Conference Proceedings. Salt Lake City, UT. [Abstract]

Zhang, L., & Walters, K. B. (2015). Effect of Storage Temperature and Time on the Physical and Chemical Properties of Pyrolysis Oil. 13th Annual Graduate Student Research Symposium. Mississippi State University, MS.

Yuan, J., & Shi, S. (2008). Development of Bio-based Polyurethane Wood Foam Products. Forest Products Society 62nd International Convention. St. Louis, MO.

Eseller, K. E., Srinivasan, K. K., Yueh, F. Y., Kalluru, R., & Singh, J. P. (2008). Equivalence Ratio Measurement of Biodiesel Flame with Laser Induced Breakdown Spectroscopy. 1st Energy Workshop, April 17, 2008, Mississippi State University.

Eseller, K. E., Srinivasan, K. K., Yueh, F. Y., Kalluru, R., & Singh, J. P. (2008). Measurement of Equivalence Ratio of Biodiesel Flame with Laser Induced Breakdown Spectroscopy. The First North American Symposium on Laser Induced Breakdown Spectroscopy (NASLIBS), Oct. 8-10, 2007, New Orleans, La..

Patel, R., Riveros, G., Thompson, D., Acosta, F., Perkins, E., Hoover, E., Peters, J., & Tordesillas, A. (2017). Early Detection of Failure Mechanisms in Resilient Bio-structures: A Complex Network Study. TR-17-11. Vicksburg, MS: ERDC. DOI:10.21079/11681/24960..

Saleme Ruiz, K., & Stone, T.W. (2013). Method for Digitally Generating the Microstructure for Brittle and Layered Biomaterials. ERDC Interim Report #1. Mississippi State University: Center for Advanced Vehicular Systems. 1(1), 1-30. [Abstract]

Srinivasan, K. K. (2009). Biomass Utilization Thrust of the Sustainable Energy Research Center - Final Report. US Department of Energy . Mississippi State University, MS.

Crawford, F., Fisher, J., AbuOmar, O., & Prabhu, R. (2018). A Multivariate Linear Regression Analysis of In Vitro Testing Conditions and Brain Biomechanical Response under Shear Loads. Las Vegas, NV.

Murphy, M. A., Prabhu, R., Williams, L. N., & Horstemeyer, M. (2017). Loading Rate Effect on The Ratio of Yield to Failure Stress for A Simplified Membrane. International Mechanical Engineering Congress & Exposition. Tampa, FL: American Society of Mechanical Engineers. [Abstract]

AbuOmar, O., Jones, M., King, R., & Prabhu, R. (2017). Data Mining the Effects of Testing Conditions on Brain Biomechanical Properties. Las Vegas, NV.

Marufuzzaman, M., Poudel, S., & Usher, J. (2016). Managing Congestion in a Multi-Modal Transportation Network under Biomass Supply Uncertainty. University Transportation Center (UTC) Conference, 31 Mar. - 1 Apr., Knoxville, TN.

Howlader, M. S., French, W., & Rai, N. (2015). Solubility of Carbon Dioxide in Sugar Broth, Rhodotorula Glutinis, and Spent Cell: A Preliminary Study of Cell Disruption Using High Pressure Carbon Dioxide. AIChE National Meetingh. Salt Lake City, UT: AIChE.

Kumari, S., Vasquez, E.S., Walters, K. B., & Walters, K. (2015). Surface-modified Nanoparticles Designed for Biomedical Applications with Computational Simulation Validation of Particle Transport within the Human Lung. 2015 National NSF EPSCoR Meeting. Portsmouth, New Hampshire.

Burgreen, GW (2015). Improving Computational Modeling: From Colorful Fluid Dynamics to Clinically Relevant Fluid Dynamics. ASAIO 61st Annual Conference. Chicago, IL.

Molen, M. (2012). MSU EcoCAR 2: Plugging in to the Future. Southeast Biofuels and Renewable Energy Conference. Jackson, MS.

Krishnan, S. R. (2012). Tailoring Renewable Biofuels for Future Engine Combustion Strategies. Presented at the Southeast Biofuels and Renewable Energy Conference, August 8, 2012. Jackson, MS.

Prabhu, R., Mao, Y., Marin, E., Williams, L. N., Liao, J., & Horstemeyer, M. (2012). Novel Simulation-Based Analysis of the Biomechanics of Blast-Related Traumatic Brain Injury (bTBI). BMES 2012 Annual Meeting. Atlanta, GA. [Document]

Burgreen, GW (2011). CAVS CFD Activities in Biomedical CFD. MSU Bioengineering Competition.

Burgreen, GW, & Newman, J. (2009). Robust Simulation of CFD-predicted Hemolysis. Plenary Talk. NIH/FDA/NSF Computational Modeling for Cardiovascular Devices Meeting, Rockville, MD,.

Antonyraj, A., Park, S. J., Thibaudeau, G., German, R., & Brain, B. (2008). Fabrication of Bio-Inspired Design Engineering Components by Powder Metallurgy. Bio Inspired Design 2008 Conference, August 19-22, Mississippi State, MS.

Antonyraj, A., Park, S. J., Thibaudeau, G., German, R., & Baldwin, B. (2008). Fabrication of Bio-Inspired Design Engineering Components by Powder Metallurgy. Bio-Inspired Design Conference, MSU, August 2008. Mississippi State. [Abstract]

Baldwin, B., Giselle, T., & Antonyraj, A. (2008). Bamboo as a Bio-inspired Engineering Materials. Bio-Inspired Conference, MSU, August 2008. Mississippi State. [Abstract]

Mao, A., Shi, S., Kim, M., & Steele, P. (2008). An Investigation of Using Pyrolysis Bio-oil as Part of the Binder System for Wood-based Composites. Forest Products Society 62nd International Convention. St. Louis, MO.

Rhee, H., Hwang, Y., Liyanage, Laalitha S. I., & Horstemeyer, M. (2006). Multiscale Structures and Mechanical Behavior of a Biological Composite Material: Turtle Shell. 2006 Materials Research Society (MRS) Fall Meeting. Boston, MA.

Burgreen, GW (2009). Featured Section. BCOE Dean's Report. MSU.

Weed, B., & Liao, J. (2013). Creation of a Computational Simulation of Maternal Trauma in Motor Vehicle Accident. Mississippi State: Mississippi State University. [Abstract]

Wang, B., & Liao, J. (2012). DECELLULARIZED PORCINE MYOCARDIUM AS A SCAFFOLD FOR CARDIAC TISSUE ENGINEERING. Mississippi State: Mississippi State University. [Abstract]

Williams, K., & Williams, L. N. (2011). MICROMECHANICAL ANALYSIS OF CELLS FROM HYPERELASTOSIS CUTIS (HC) AFFECTED AND CARRIER HORSES. Mississippi State University: MSU Library. [Abstract]

Chen, J., & Liao, J. (2010). INVESTIGATION OF HIGH RATE MECHANICAL PROPERTIES AND DAMAGE EVOLUTION IN PORCINE LIVER TISSUE. Mississippi State: Mississippi State University. [Abstract]

Davis, D. D., & Williams, L. N. (2008). STRAIN RATE EFFECTS ON STRUCTURE-PROPERTY RELATIONSHIP IN THE RABBIT PATELLAR TENDON. Mississippi State University: MSU Library. [Abstract]