CAVS Publications
Search Publications
Bammann, D., Horstemeyer, M., Chiesa, M. L., & Weingarten, L. I. (1993). Failure in Ductile Materials Using Finite Element Methods. In T. Wierzbicki and N. Jones (Eds.), Structural Crashworthiness and Failure. University of Liverpool, England: Elsevier Applied Science.
Peer-Reviewed Journals
Bakhtiarydavijani, A., Murphy, M. A., Mun, S., Jones, M. D., Bammann, D., LaPlaca, M. C., Horstemeyer, M., & Prabhu, R. (2019). Damage Biomechanics for Neuronal Membrane Mechanoporation. Modelling and Simulation in Materials Science and Engineering. 27, 065004. DOI:10.1088/1361-651X/ab1efe. [Abstract]
Liu, Y., & Bammann, D. (2019). A Multiphase Internal State Variable Model with Rate Equations for Predicting Elastothermoviscoplasticity and Damage of Fiber-reinforced Polymer Composites. Acta Mechanica. 230(5), 1745-1780.
Chandler, M. Q., Bammann, D., & Horstemeyer, M. (2013). A Continuum Model for Hydrogen-Assisted Void Nucleation in Ductile Materials. Modelling and Simulation in Materials Science and Engineering. IOP Science. 21(5), 1-18.
Salehghaffari, S., Rais-Rohani, M., Marin, E., & Bammann, D. (2013). Optimization of Structures Under Material Parameter Uncertainty Using Evidence Theory. Engineering Optimization. Taylor & Francis. 45(9), 1027-1041. DOI:10.1080/0305215X.2012.717073.
Ahad,Fazle, Enakoutsa, K., Solanki, K.N., Tjiptowidjojo, Y., & Bammann, D. (2013). Modeling the Dynamic Failure of Railroad Tank Cars Using a Physically Motivated Internal State Variable Plasticity/Damage Nonlocal Model. Modelling and Simulation in Engineering. Hindawi Publishing Corporation. 2013(ID 815158), 11 pages. DOI:10.1155/2013/815158.
Florea, R. S., Bammann, D., Yeldell, J., Solanki, K.N., & Hammi, Y. (2013). Welding Parameters Influence on Fatigue Life and Microstructure in Resistance Spot Welding of 6061-T6 Aluminum Alloy. Materials & Design. 45, 456-465. DOI:10.1016/j.bbr.2011.03.031. [Abstract]
Bouvard, J.-L., Francis, D.K., Tschopp, M. A., Marin, E., Bammann, D., & Horstemeyer, M. (2013). An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation. International Journal of Plasticity. 42, 168-193. DOI:10.1016/j.ijplas.2012.10.005. [Abstract] [Document Site]
Enakoutsa, K., Solanki, K. N., & Bammann, D. (2012). Damage Smoothing Effects in a Delocalized Rate Sensitivity Model for Metals. Theoretical and Applied Mechanics Letters. 2(5), 5 pages. DOI:10.1063/2.1205105.
Enakoutsa, K., Ahad,Fazle, Bammann, D., & Solanki, K. N. (2012). Using Damage Delocalization to Model Localization Phenomena in Bammann-Chiesa-Johnson Metals. Journal of Engineering Materials and Technology. 34(4), 041014-9. DOI:10.1115/1.4007352. [Abstract]
Florea, R. S., Hubbard, C. R., Solanki, K. N., Bammann, D., Whittington, W. R., & Marin, E. (2012). Quantifying Residual Stresses in Resistance Spot Welding of 6061-T6 Aluminum Alloy Sheets via Neutron Diffraction Measurements. Journal of Materials Processing Technology. Elsevier. 212, 2358-2370. DOI:10.1016/jmatprotec.2012.06.024. [Abstract]
Salehghaffari, S., Rais-Rohani, M., Marin, E., & Bammann, D. (2012). A New Approach for Determination of Material Constants of Internal State Variable Based Plasticity Models and Their Uncertainty Quantification. Computational Materials Science. Elsevier. 55, 237-244. [Document]
Florea, R. S., Solanki, K.N., Bammann, D., Baird, J., Jordon, B. J., & Castanier, M. P. (2012). Resistance Spot Welding of 6061-T6 Aluminum Alloy: Failure Loads and Deformation. Materials and Design. Elsevier. 34, 624-630. [Abstract]
Sherburn, J. A., Horstemeyer, M., Bammann, D., & Baumgardner, J. R. (2011). Two Dimensional Mantle Convection Simulations Using an Internal State Variable Model: The Role of a History Dependent Rheology on Mantle Convection. Geophysical Journal International. 186(3), 945-962.
Solanki, K.N., Ward, D. K., & Bammann, D. (2011). A Nanoscale Study of Dislocation Nucleation at the Crack Tip in Nickel-Hydrogen System. Metallurgical and Materials Transactions A. 42(2), 340-347. [Abstract] [Document Site]
Sherburn, J. A., Horstemeyer, M., Bammann, D., & Baumgardner, J. (2011). Two Dimensional Mantel Convection Simulations Using an Internal State Variable Model: The Role of a History Dependent Rheology on Mantle Convection. Geophysical Journal Int. 186(3), 945-962.
Solanki, K.N., & Bammann, D. (2010). A Thermodynamic Framework for a Gradient Theory of Continuum Damage. Acta Mechanica. 213(1-2), 27–38. [Abstract] [Document Site]
Bouvard, J.-L., Ward, D. K., Hossain, D., Marin, E., Bammann, D., & Horstemeyer, M. (2010). A General Inelastic Internal State Variable Model for Amorphous Glassy Polymers. Acta Mechanica. 213(1), 71-96.
Bammann, D., & Solanki, K.N. (2010). On Kinematic, Thermodynamic, and Kinetic Coupling of a Damage Theory for Polycrystalline Material. International Journal of Plasticity. 26(6), 775–793. [Abstract] [Document Site]
Groh, S., Marin, E., Horstemeyer, M., & Bammann, D. (2009). Dislocation Mobility in Magnesium: A Molecular Dynamics/statics Study. Modelling Simulation Material Science and Engineering. 17, 075009. [Document Site]
Chandler, M. Q., Bammann, D., & Horstemeyer, M. (2009). A Continuum Hydrogen-Assisted Void Nucleation Model for Ductile. Mechanics and Physics of Solids.
El Kadiri, H., Horstemeyer, M., & Bammann, D. (2008). A Theory of Stress-Driven Interfacial Damage upon Cationic Selective Oxidation of Alloys. In K. Bhattacharya and H. Gao (Eds.), Journal of Mechanics and Physics of Solids. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 56(12), 3392-3415. [Abstract]
Liang, Y., Ahn, D. C., Sofronis, P., Dodds, R. H., Jr., & Bammann, D. (2008). Effect of Hyrdrogen Trapping on Void Growth and Coalescence in Metals and Alloys. Mechanics of Materials. 40(3), 115-132.
Hammi, Y., Bammann, D., & Horstemeyer, M. (2004). Modeling of Anisotropic Damage for Ductile Materials in Metal Forming Processes. International Journal of Damage Mechanics. SAGE Publications Ltd. 13(2), 123-147. [Abstract]
Hammi, Y., Horstemeyer, M., & Bammann, D. (2003). An Anisotropic Damage Model for Ductile Metals. International Journal of Damage Mechanics. SAGE Publications Ltd. 12(3), 245-262. [Abstract]
Hammi, Y., Horstemeyer, M., & Bammann, D. (2002). An Anisotropic Damage Model for Ductile Metals. Proceedings of the ASME Materials Division - 2002. New Orleans, LA, United States: American Society of Mechanical Engineers. 97, 185-192. [Abstract]
Peer-Reviewed Conference Abstracts
Bouvard, J.-L., Tschopp, M. A., Bammann, D., & Horstemeyer, M. (2011). Multiscale Modeling of Amorphous Polymers: from Molecular Dynamic Simulations to Continuum Models. USNCCM 2011. Minneapolis, MN.
Peer-Reviewed Conference Papers
Liu, Y., & Bammann, D. (2018). An Elastothermovisco-Plasticity Anisotropic Damage Model for Short Fiber Reinforced Polymer Composites. ASME 2018 International Mechanical Engineering Congress & Exposition. Pittsburgh, PA.
Liu, Y., Horstemeyer, M., & Bammann, D. (2017). A Multiphase Internal State Variable Model for Predicting the Plasticity and Damage Mechanisms of Fiber-Reinforced Polymers. Proceedings of ASME 2017 International Mechanical Engineering Congress & Exposition. Tampa, FL: ASME.
Enakoutsa, K., Ahad,Fazle, Solanki, K.N., & Bammann, D. (2011). Localization Effects in Bammann-Chiesa-Johnson Metals with Damage Delocalization. ASME International Mechanical Engineering Congress And Exposition (IMECE2011-65935). Denver, CO: ASME. [Abstract]
Salehghaffari, S., Rais-Rohani, M., Marin, E., & Bammann, D. (2011). An Evidence-Based Framework for Determination of Material Constants in Advanced Plasticity Models. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Denver, CO: AIAA.
Ahad,Fazle, Enakoutsa, K., Solanki, K.N., Tjiptowidjojo, Y., & Bammann, D. (2011). A Physically Motivated Internal State Variable Plasticity and Damage Model Embedded with a Length Scale for Hazmat Railroad Tank Cars Structural Integrity Applications. ASME/ASCE/IEEE 2011 JRC. Pueblo, CO: ASME. [Document]
Florea, R. S., Solanki, K.N., Bammann, D., Jordon, J. B., & Castanier, M. (2011). Failure Loads and Deformation in 6061-T6 Aluminum Alloy Spot Welds. 2011 TMS Annual Meeting & Exposition. San Diego, California: TMS 2011. [Abstract]
Florea, R. S., Solanki, K.N., Hammi, Y., Bammann, D., & Castanier, M. P. (2010). An Experimental Study of Mechanical Behavior of Resistance Spot Welded Aluminum 6061-T6 Joints. Proceedings of the ASME International Mechanical Engineering Congress & Exposition, IMECE2010. Vancouver, British Columbia, Canada. [Abstract]
Bouvard, J.-L., Ward, D. K., Marin, E., Bammann, D., & Horstemeyer, M. (2010). Development of an Internal State Variable Model to Describe the Mechanical Behavior of Amorphous Polymer and Its Application to Impact Testing. SEM 2010 proceedings. SEM 2010-Mechanics of Time-Dependent Materials Symposia, Indianapolis.
Bouvard, J.-L., Marin, E., Horstemeyer, M., Ward, D. K., & Bammann, D. (2009). Experimental Testing and Numerical Model of Thermoplastics: PC, PP, and ABS. CFM09. Marseille, France.
Wang, L., Felicelli, S. D., Bammann, D., & Hubbard, C. R. (2009). Computational and Experimental Analysis of Residual Stresses in Resistance Spot Welding. International Conference WELDS 2009. Fort Myers, FL . [Abstract]
Acar, E., Rais-Rohani, M., Najafi, A., Marin, E., & Bammann, D. (2009). Concurrent Design of Product-Material Systems Using Multilevel Optimization. Proceedings of the 5th AIAA Multidisciplinary Design Optimization Specialists Conference, Palm Springs, CA.
Tucker, M.T., Bammann, D., Park, S. J., Kwon, Y. S., Horstemeyer, S., & German, R. (2008). High Rate Deformation in Press-and-Sintered W-Cu Using Hopkinson Bar Test. Proceedings of the 2008 International Conference on Tungsten, Refractory & Hardmaterials VII, Washington, D.C., USA, June 8-12, Metal Powder Industry Federation, Princeton, NJ. pp. 7-28-7-33, .
Tucker, M.T., Bammann, D., Park, S. J., Kwon, Y. S., & German, R. (2008). High Rate Deformation in Press-Sinter W-Cu Using Hopkinson Bar Test. Proceedings of the International Conference on Tungsten, Refractory and Hardmaterials VII, Metal Powder Industries Federation, Princeton, NJ.
Gullett, P., Horstemeyer, M., Bammann, D., & Baskes, M. I. (2001). A Comparison of Atomistic and Elastic Continuum Based Shear Stress Distributions Near an Edge Dislocation. Proceedings of the International Conference on Computational Engineering and Science. Puerta Vallarta, Mexico.
Horstemeyer, M., Dike, J. J., Chiesa, M. L., Weingarten, L. I., Dawson, D., Bammann, D., Revelli, V. D., & Prantil, V. (1997). Use of an Internal State Variable Model for Underwater Explosion Simulations. Symposium of Underwater Explosion Phenomena. Dunfermline, Scotland.
Horstemeyer, M., Chiesa, M. L., & Bammann, D. (1994). Predicting Forming Limit Diagrams with Explicit and Implicit Finite Element Codes. Analysis of Autobody Stamping Technology.
Horstemeyer, M., McDowell, D. L., & Bammann, D. (1994). Torsional Softening and the Forming Limit Diagram. SAE Analysis of Autobody Stamping Technology. Detroit, MI.
Peer-Reviewed Conference Posters
Florea, R. S., Hubbard, C. R., Cady, B., Cornwell, P., Bammann, D., Marin, E., & Asle Zaeem, M. (2011). Neutron Diffraction Mapping (NDM) for Residual Stresses in Resistance Spot Welding (RSW). ONSUM 2011. Oak Ridge, TN: Oak Ridge National Laboratory. [Abstract] [Document]
Non-Refereed Conference Abstracts
Bouvard, J.-L., Tschopp, M. A., Bammann, D., & Horstemeyer, M. (2011). Development of a Multiscale Strategy to Predict the Material Response of Polymers. ASME. Denvers, CO.
Non-Refereed Conference Papers
Rais-Rohani, M., Marin, E., Haupt, T., & Bammann, D. (2011). Epistemic Uncertainty Modeling of Plasticity Material Models. NSF CMMI Research and Innovation Conference. Atlanta, GA: NSF.
Non-Refereed Conference Posters
Rais-Rohani, M., Marin, E., Haupt, T., & Bammann, D. (2012). Computational Design Tool Development for Multilevel Optimization of Product-Material Systems Under Uncertainty. NSF CMMI Engineering Research and Innovation Conference. Boston, MA: NSF.
Rais-Rohani, M., Marin, E., Haupt, T., & Bammann, D. (2011). Epistemic Uncertainty Modeling of Plasticity Material Models (Poster). NSF CMMI Research and Innovation Conference. Atlanta, GA: NSF.
Rais-Rohani, M., Bammann, D., Haupt, T., & Marin, E. (2009). Computational Design Tool Development for Multilevel Optimization of Product-Material Systems Under Uncertainty. NSF CMMI Conference. Honolulu, HI: NSF.
Rais-Rohani, M., Marin, E., Haupt, T., & Bammann, D. (2009). Computational Design Tool Development for Multilevel Optimization of Product-Material Systems Under Uncertainty. NSF CMMI Research and Innovation Conference. Honolulu, HI: NSF.
Articles in Trade Journals and Popular Press
Horstemeyer, M., & Bammann, D. (2010). Historical Review of Internal State Variable Theory for Inelasticity. International Journal of Plasticity. El Sevier. 26(9), 1310-1134. [Document]
Agarwal, H., Gokhale, A. M., Graham, S., Horstemeyer, M., & Bammann, D. (2002). Rotations of Brittle Particles During Plastic Deformation of Ductile Alloys. Materials Science and Engineering-A. Elsevier Ltd.. 328, 310-316. [Document]
Hammi, Y., Horstemeyer, M., & Bammann, D. (). An Anisotropic Damage Model for Ductile Metals. International Journal of Damage Mechanic. 12(3), 245-262.
In-House
Horstemeyer, M., Bammann, D., Marin, E., Solanki, K.N., Groh, S., & Ren, X. (2007). DOE/SRCLID FY 2006-2007. CAVS Report MSU.CAVS.CMD.2007-R0041.
Technical Report
Rais-Rohani, M., Marin, E., Haupt, T., & Bammann, D. (2011). Computational Design Tool Development for Multilevel Optimization of Product-Material Systems Under Uncertainty. NSF: NSF.
Rais-Rohani, M., Marin, E., Haupt, T., & Bammann, D. (2011). Computational Design Tool Development for Multilevel Optimization of Product-Material Systems under Uncertainty. Annual Report. NSF.
Professional Presentations
Bouvard, J.-L., Tschopp, M. A., Marin, E., Bammann, D., & Horstemeyer, M. (2011). Development of a Multiscale Strategy to Predict the Material Response of Polymers. ASME 2011. Denvers, CO.
Bouvard, J.-L., Solanki, K.N., Tschopp, M. A., Bammann, D., & Horstemeyer, M. (2011). Multiscale Modeling of Amorphous Polymers: from Molecular Dynamic Simulations to Continuum Models. USNCCM 2011. Minneapolis, MN.
Bouvard, J.-L., Ward, D. K., Marin, E., Bammann, D., & Horstemeyer, M. (2010). Development of an Internal State Variable Model to Describe the Mechanical Behavior of Amorphous Polymer and Its Application to Impact Testing. , SEM 2010-Mechanics of Time-Dependent Materials Symposia, Indianapolis.
Wang, P., Wang, L., Bammann, D., & Marin, E. (2009). Modeling of Welding Process of Steel Alloys and Its Extension to Thermo-mechanical Processing. Association for Iron & Steel Technology (AIST) Fall Meeting. Birmingham, AL.
Bouvard, J.-L., Marin, E., Horstemeyer, M., Ward, D. K., & Bammann, D. (2009). Experimental Testing and Numerical Model of Thermoplastics: PC, PP, and ABS. Marseille, France: CFM09.
Groh, S., Marin, E., Horstemeyer, M., & Bammann, D. (2009). Dislocation Motion in Magnesium: a Study by Molecular Static and Molecular Dynamics. Plasticity 09. St Thomas, Virgin Island.
Bammann, D., Ward, D. K., Groh, S., & Bouvard, J.-L. (2008). A Consistent Theory for Internal State Variable Theory. American Academy of Mechanics. New Orleans, La. [Abstract]
Patents and Licenses
Horstemeyer, M., Wang, P., Felicelli, S. D., El Kadiri, H., Berry, J., & Bammann, D. (2007). LENS Modeling System Modification 5, $1.65MM,.