#
# Data set for MSU Multi-Stage Fatigue Model v.2.1 (Academic Version)
#
model_tag= MSF2

# Fields in the data set
# material - Tag for material
# tag - Tag for data set
# source - Source of data set
# comment - Any other comment on data set
# Emod - Young's modulus [MPa]
# Syld - Yield stress [MPa]
# Sult - Ultimate Stress [MPa]
# DCS0 - Reference grain size (microns)
# DCS - Grain size (microns)
# GO0 - Reference grain orientation (units?)
# GO - Grain orientation (units?)
# poresize - Pore size
# porennd - Pore nearest neighbor distance
# porosity - Porosity
# porTH - Porosity threshold
# partsize - Particle size average
# partdev - Particle size standard deviation
# NTYPE - Type of fatigue loading: 1=Crack length propagation, 2=Fatigue life
# MODEL - 1=Elastic, 2=Plastic
# NSPEC - No. of spectrum fatigue loads (0 for undetermined and crack length limit)
# NSAMP - 1=Strain, 2=Stress amplitude load
# excluded - Is dataset excluded? 0=no, 1=yes
# is_curve - Is dataset a curve only? 0=no, 1=yes
# experiment - (Stress/Strain/a, No. of Cycles)
# NFLOAD - Number of applied fatigue loads
# FLOAD - Fatigue loading [Nloadef, S, Smean or R, a, NCycles]
#
material= 316LSS
tag= Strain-Life
source= Omesh K. Chopra, Developement of fatigue design curve for austenitic Stainless Steels in LWR environments: A review , Energy Technology Division, Argonne National Laboratory, http://www.ipd.anl.gov/anlpubs/2002/03/42152.pdf
comment= !!! EDIT THE INFO FOR THIS DATA SET !!!
Emod= 193000
Syld= 290
Sult= 579
DCS0= 15
DCS= 15
GO0= 1
GO= 1
poresize= 1
porennd= 20
porosity= 0.0015
porTH= 0.0001
partsize= 50
partdev= 1
NTYPE= 2
MODEL= 2
NSPEC= 1
NSAMP= 1
excluded= 0
is_curve= 0
NFLOAD= 1
FLOAD= 1
2 0.11 1.5 -1 100
experiment= 9
0.11 2.5e+07
0.12 5.6e+06
0.15 1.1e+06
0.18 310000
0.23 130000
0.34 28000
0.55 8700
1.1 850
1.5 420