CAVS Publications
Search Publications
Doude, H., Oglesby, D., Gullett, P., El Kadiri, H., Jelinek, B., Baskes, M. I., Oppedal, A. L., Hammi, Y., & Horstemeyer, M. (2018). Cast Magnesium Alloy Corvette Engine Cradle. In M. F. Horstemeyer (Ed.), Integrated Computational Materials Engineering (ICME) for Metals: Concepts and Case Studies. John Wiley & Sons, Inc.. DOI:10.1002/9781119018377.ch10. [Abstract]
Peer-Reviewed Journals
Stewart, B. C., Doude, H., Mujahid, S., Abney, M. B., Edmunson, J. E., Fox, E. T., Jones, J. M., Hill, C. W., Mehan, J. J., El Kadiri, H., & Rhee, H. (2023). Effects of Nickel and Manganese on Ductile Iron Utilizing Ionic Liquid Harvested Iron and Bosch Byproduct Carbon. Acta Astronautica. 204, 16. DOI:10.1016/j.actaastro.2022.12.047. [Abstract] [Document Site]
Stewart, B. C., Doude, H., Mujahid, S., Abney, M. B., Fox, E. T., Edmunson, J. E., Mehan, J. J., Henry, C. R., Hall, P. B., El Kadiri, H., & Rhee, H. (2023). Comparison Study of Ductile Iron Produced with Martian Regolith Harvested Iron from Ionic Liquids and Bosch Byproduct Carbon for In-situ Resource Utilization versus Commercially Available 65-45-12 Ductile Iron. Advances in Space Research. 71(5), 16. DOI:10.1016/j.asr.2022.10.060. [Abstract] [Document Site]
Allen, R., Toth, L. S., Oppedal, A. L., & El Kadiri, H. (2018). Crystal Plasticity Modeling of Anisotropic Hardening and Texture Due to Dislocation Transmutation in Twinning. Materials. MDPI. 11, article 1855. DOI:10.3390/ma11101855. [Abstract] [Document]
Wang, F., Hazeli, K., Molodov, K. D., Barrett, C. D., Al-Sammon, T., Molodov, D. A., Kontsos, A., Ramesh, K. T., El Kadiri, H., & Agnew, S. R. (2018). Characteristic Dislocation Substructure in 1012 Twins in Hexagonal Metals. Scripta Materialia. 143, 81-85. DOI:10.1016/j.scriptamat.2017.09.015.
Allison, P. G., Rodriguez, O. L., Whittington, W. R., El Kadiri, H., Rivera, O. G., & Barkey, M. E. (2018). Strain Rate Effect on the Tension and Compression Stress-state Asymmetry for Electron Beam Additive Manufactured Ti6Al4V. Materials Science and Engineering: A. Elsevier. 713, 125-133. [Abstract]
Paudel, Y., Barrett, C. D., Tschopp, M., Inal, K., & El Kadiri, H. (2017). Beyond Initial Twin Nucleation in Hcp Metals: Micromechanical Formulation for Determining Twin Spacing during Deformation. Acta Materialia. 133, 134-146.
Imandoust, A., Barrett, C. D., Oppedal, A. L., Whittington, W. R., Paudel, Y. R., & El Kadiri, H. (2017). Nucleation and Preferential Growth Mechanism of Recrystallization Texture in High Purity Binary Magnesium-rare Earth Alloys. Acta Materialia. Pergamon. 138, 27-41. DOI:10.1016/j.actamat.2017.07.038. [Document Site]
Bhattacharyya, J. J., Agnew, S. R., Lee, M. M., Whittington, W. R., & El Kadiri, H. (2017). Measuring and Modeling the Anisotropic, High Strain Rate Deformation of Al Alloy, 7085, Plate in T711 Temper. International Journal of Plasticity. Pergamon. 93, 46-63. [Abstract]
Barrett, C. D., El Kadiri, H., & Moser, R. (2017). Generalized Interfacial Fault Energies. International Journal of Solids and Structures. 110, 106-112.
Barrett, C. D., Imandoust, A., Oppedal, A. L., Inal, K., Tschopp, M. A., & El Kadiri, H. (2017). Effect of Grain Boundaries on Texture Formation during Dynamic Recrystallization of Magnesium Alloys. Acta Materialia. Pergamon. 128, 270-283. DOI:10.1016/j.actamat.2017.01.063. [Abstract] [Document Site]
Qiao, H., Guo, X. Q., Oppedal, A. L., El Kadiri, H., Wu, P. D., & Agnew, S. R. (2017). Twin-induced Hardening in Extruded Mg Alloy AM30. Materials Science and Engineering: A. Elsevier. 687, 17--27. DOI:10.1016/j.msea.2016.12.123. [Abstract]
Imandoust, A., Barrett, C. D., Al-Samman, T., Inal, K. A., & El Kadiri, H. (2016). A Review on the Effect of Rare-earth Elements on Texture Evolution during Processing of Magnesium Alloys. Journal of Materials Science. Springer US. 52(1), 1-29.
Kohar, C. P., Cherkaoui, M., El Kadiri, H., & Inal, K. A. (2016). Numerical Modeling of TRIP Steel in Axial Crashworthiness. International Journal of Plasticity. Elsevier. 84, 224–254.
Mo, C., Wisner, B., Cabal, M., Hazeli, K., Ramesh, K. T., El Kadiri, H., Al-Samman, T., Moldov, K., Moldov, D. A., & Kontsos, A. (2016). Acoustic Emission of Deformation Twinning in Magnesium. Materials. 9(8), 662.
Bhattacharyya, J. J., Wang, F., Wu, P. D., Whittington, W. R., El Kadiri, H., & Agnew, S. R. (2016). Demonstration of Alloying, Thermal Activation, and Latent Hardening Effects on Quasi-static and Dynamic Polycrystal Plasticity of Mg Alloy, WE43-T5, Plate. International Journal of Plasticity. Elsevier. 81, 123-151.
Tari, V., Rollett, A. D., El Kadiri, H., Beladi, H., Oppedal, A. L., & King, R. (2015). The Effect of Deformation Twinning on Stress Localization in a Three Dimensional TWIP Steel Microstructure. Modelling and Simulation in Materials Science and Engineering. IOPscience. 23(4), 045010. DOI:10.1088/0965-0393/23/4/045010. [Abstract] [Document Site]
Mamivand, M., Zaeem, M. A., & El Kadiri, H. (2015). Effect of Variant Strain Accommodation on the Three-dimensional Microstructure Formation during Martensitic Transformation: Application to Zirconia. Acta Materialia. Pergamon. 87, 45-55. DOI:10.1016/j.actamat.2014.12.036.
El Kadiri, H., Barrett, C. D., Wang, J., & Tome, C. N. (2015). Why Are {10-12} Twins Profuse in Magnesium? Acta Materialia. Pergamon. 85, 354-361.
Rodriguez, R. I., Jordon, J. B., Rao, H. M., Badarinarayan, H., Yuan, W., El Kadiri, H., & Allison, P. G. (2014). Microstructure, Texture, and Mechanical Properties of Friction Stir Spot Welded Rare-earth Containing Magnesium ZEK100 Alloy Sheets. Materials Science and Engineering A. 618, 637-644.
Barrett, C. D., & El Kadiri, H. (2014). Fundamentals of Mobile Tilt Grain Boundary Faceting. Scripta Materialia. Elsevier. 84, 15-18.
Asle Zaeem, M., & El Kadiri, H. (2014). An Elastic Phase Field Model for Thermal Oxidation of Metals: Application to Zirconia. Computational Materials Science. Elsevier. 89, 122-129.
Barrett, C. D., & El Kadiri, H. (2014). Impact of Deformation Faceting on {10-12}, {10-11}, and {10-13} Embryonic Twin Nucleation in Hexagonal Close-packed Metals. Acta Materialia. 70, 137–161.
Mamivand, M., Asle Zaeem, M., & El Kadiri, H. (2014). Shape Memory Effect and Pseudoelasticity Behavior in Tetragonal Zirconia Polycrystals: A Phase Field Study. International Journal of Plasticity. 60, 71-86.
Mamivand, M., Asle Zaeem, M., & El Kadiri, H. (2014). Phase Field Modeling of Stress-induced Tetragonal-to-monoclinic Transformation in Zirconia and Its Effect on Transformation Toughening. Acta Materialia. Pergamon. 64, 208-219.
Agnew, S. R., Whittington, W. R., Oppedal, A. L., El Kadiri, H., Shaeffer, M., Ramesh, K. T., Bhattacharyya, J., Delorme, R., & Davis, B. (2014). Dynamic Behavior of a Rare-Earth-Containing Mg Alloy, WE43B-T5, Plate with Comparison to Conventional Alloy, AM30-F. Journal of Metals. Springer. 66, 277-290.
Barrett, C. D., & El Kadiri, H. (2014). The Roles of Grain Boundary Dislocations and Disclinations in the Nucleation of {10-12} Twinning. Acta Materialia. Pergamon. 63, 1-15.
Mamivand, M., Asle Zaeem, M., & El Kadiri, H. (2014). Phase Field Modeling of Stress-induced Tetragonal-to-monoclinic Transformation in Zirconia and Its Effect on Transformation Toughening. Acta Materialia. 64, 208–219. DOI:10.1016/j.actamat.2013.10.031.
Bernard, J. D., Jordon, J. B., Horstemeyer, M., El Kadiri, H., Baird, J., Lamb, D., & Luo, A. A. (2013). Structure-Property Relations of Cyclic Damage in a Wrought Magnesium Alloy. Scripta Materialia. Pergamon. 63(7), 751-756.
El Kadiri, H., Barrett, C. D., & Tschopp, M. A. (2013). The Candidacy of Shuffle and Shear during Compound Twinning in Hexagonal Close-packed Structures. Acta Materialia. 61, 7646-7659. DOI:10.1016/j.actamat.2013.09.002. [Document Site]
Mamivand, M., Asle Zaeem, M., & El Kadiri, H. (2013). A Review on Phase Field Modeling of Martensitic Phase Transformation. Computational Materials Science. 77, 304–311. DOI:10.1016/j.commatsci.2013.04.059.
El Kadiri, H., & Barrett, C. D. (2013). Comments on "extended Zonal Dislocations Mediating {11-22} [11-2-3] Itwinning in Titanium". Philosophical Magazine. 93(26), 3491-3494. [Abstract]
Mamivand, M., Asle Zaeem, M., El Kadiri, H., & Chen, L. Q. (2013). Phase Field Modeling of the Tetragonal-to-monoclinic Phase Transformation in Zirconia. Acta Materialia. 61(14), 5223–5235. DOI:10.1016/j.actamat.2013.05.015.
Oppedal, A. L., El Kadiri, H., Tomé, C. N., Vogel, S. C., & Horstemeyer, M. (2013). Anisotropy in Hexagonal Close-packed Structures: Improvements to Crystal Plasticity Approaches Applied to Magnesium Alloy. Philosophical Magazine. Taylor & Francis. 93(35), 4311-4330. DOI:10.1080/14786435.2013.827802. [Abstract] [Document Site]
El Kadiri, H., Utegulov, Z. N., Khafizov, M., Asle Zaeem, M., Mamivand, M., Oppedal, A. L., Enakoutsa, K., Cherkaoui, M., Graham, R. H., II, & Arockiasamy, A. (2013). Transformations and Cracks in Zirconia Films Leading to Breakaway Oxidation of Zircaloy. Acta Materialia. Elsevier. 61(11), 3923-3925. DOI:10.1016/j.actamat.2013.02.052. [Abstract] [Document Site]
El Kadiri, H., Baird, J., Kapil, J., Oppedal, A. L., Cherkaoui, M., & Vogel, S. (2013). Flow Asymmetry and Nucleation Stresses of Twinning and Non-basal Slip in Magnesium. International Journal of Plasticity. Pergamon. 44, 111-120.
El Kadiri, H., Kapil, J., Oppedal, A. L., Hector, L. G., Agnew, S. R., Cherkoui, M., & Vogel, S. C. (2013). The Effect of Twin-twin Interactions on the Nucleation and Propagation of {10-12} Twinning in Magnesium. Acta Materialia. Elsevier. 61(10), 3549-3563. DOI:10.1016/j.actamat.2013.02.030. [Abstract]
Jordon, J. B., Brown, H., El Kadiri, H., Kistler, M., Lett, R., Baird, J., & Luo, A. A. (2013). Investigation of Fatigue Anisotropy in an Extruded Magnesium Alloy. Internationa Journal of Fatigue. 51, 8-14. [Abstract]
Barrett, C. D., El Kadiri, H., & Tschopp, M. A. (2012). Breakdown of the Schmid Law in Homogeneous and Heterogeneous Nucleation Events of Slip and Twinning in Magnesium. Journal of the Mechanics and Physics of Solids. 60(12), 2084-2099. DOI:10.1016/j.jmps.2012.06.015. [Abstract] [Document Site]
El-Giar, E. M., Asle Zaeem, M., El Kadiri, H., Florea, R. S., Rhee, H., Bienvenu, Y., Dahmen, M., Malot, T., & Cherkaoui, M. (2012). On Laser Welding of Thin Steel Sheets. Science and Technology of Welding and Joining. Institute of Materials, Minerals and Mining. 17(7), 571-579. DOI:10.1179/1362171812Y.0000000050. [Abstract]
Li, B., El Kadiri, H., & Horstemeyer, M. (2012). Extended Zonal Dislocations Mediating {11-22} Twinning in Titanium. Philosophical Magazine. 92(8), 1006-1022.
Barrett, C. D., Tschopp, M. A., & El Kadiri, H. (2012). Automated Analysis of Twins in Hexagonal Close-packed Metals Using Molecular Dynamics. Scripta Materialia. 66, 666-669. DOI:10.1016/j.scriptamat.2012.01.034. [Document Site]
Asle Zaeem, M., El Kadiri, H., Horstemeyer, M., Khafizov, M., & Utegulov, Z. (2012). Effects of Internal Stresses and Intermediate Phases on the Coarsening of Coherent Precipitates: A Phase-field Study. Current Applied Physics. Elsevier. 12, 570-580. [Abstract] [Document Site]
Li, B., El Kadiri, H., & Horstemeyer, M. (2011). Extended Zonal Dislocations Mediating {1122} Twinning in Titanium. Philosophical Magazine. 92(8), 1006-1022.
Oppedal, A. L., El Kadiri, H., Tomé, C. N., Kaschner, G. C., Vogel, S. C., Baird, J., & Horstemeyer, M. (2011). Effect of Dislocation Transmutation on Modeling Hardening Mechanisms by Twinning in Magnesium. International Journal of Plasticity. Elsevier. 30-31, 41-61. DOI:10.1016/j.ijplas.2011.09.002. [Document Site]
Ma, Q., El Kadiri, H., Oppedal, A. L., Baird, J., Li, B., Horstemeyer, M., & Vogel, S. C. (2011). Twinning Effects in a Rod-Textured AM30 Magnesium Alloy. International Journal of Plasticity. 29(2012), 60-76.
Mohsen, A. Z., El Kadiri, H., Horstemeyer, M., Wang, P., & Mesarovic, S. (2011). Effect of the Compositional Strain on the Diffusive Interface Thickness and on the Phase Transformation in a Phase-Field Model for Binary Alloys. Journal of Phase Equilibria and Diffusion 2011. 1-7.
Jordon, J. B., Gibson, J. B., Horstemeyer, M., El Kadiri, H., Baird, J., & Lou, A. A. (2011). Effect of Twinning, Slip, and Inclusions on the Fatigue Anisotropy of Extrusion-textured AZ61 Magnesium Alloy. Materials Science and Engineering A. Elsevier. 528, 6860-6871. [Abstract]
Asle Zaeem, M., El Kadiri, H., Mesarovic, S. D., Horstemeyer, M., & Wang, P. (2011). Effect of the Compositional Strain on the Diffusive Interface Thickness and on the Phase Transformation in a Phase-field Model for Binary Alloys. Journal of Phase Equilibria and Diffusion. 32, 302-308. [Abstract] [Document Site]
Asle Zaeem, M., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). Investigating the Effects of Grain Boundary Energy Anisotropy and Second-Phase Particles on Grain Growth Using a Phase-Field Model. Computational Materials Science, Volume. 50(8), 2488-2492. [Abstract] [Document] [Document Site]
Asle Zaeem, M., El Kadiri, H., Horstemeyer, M., Wang, P., & Cherkaoui, M. (2011). The Role of Compositional Strain in the Instability of Solid-liquid Thin Film Interfaces. Modern Physics Letters B (MPLB). 25(19), 1-11. DOI:10.1142/S0217984911026450. [Abstract] [Document Site]
Trim, W., Horstemeyer, M., Rhee, H., El Kadiri, H., Williams, L. N., Liao, J., McKittrick, J., Walters, K. B., & Park, S. J. (2011). The Effects of Water and Microstructure on the Mechanical Properties of Bighorn Sheep (Ovis Canadensis) Horn Keratin. Acta Biomaterialia. Elsevier . 7(3), 1228-1240. [Abstract] [Document Site]
Ma, Q., El Kadiri, H., Oppedal, A. L., Baird, J., Horstemeyer, M., & Cherkaoui, M. (2011). Twinning and Double Twinning Upon Compression of Prismatic Textures in an AM30 Magnesium Alloy. Scripta Materialia. 64(9), 813-816.
El Kadiri, H., & Oppedal, A. L. (2010). A Crystal Plasticity Theory for Latent Hardening by Glide Twinning Through Dislocation Transmutation and Twin Accommodation Effects. Journal of the Mechanics and Physics of Solids. Elsevier. 58(4), 613--624. [Abstract]
Rhee, H., Horstemeyer, M., Youngkeun, H., Lim, H., El Kadiri, H., & Trim, W. (2009). A Study on the Structure and Mechanical Behavior of the Terrapene Carolina Carapace: A Pathway to Design Bio-Inspired Synthetic Composites. Materials Science and Engineering C. 29(8), 2333-2339.
Wang, L., Pratt, P., Felicelli, S. D., El Kadiri, H., Berry, J., Wang, P., & Horstemeyer, M. (2009). Pore Formation in Laser-Assisted Powder Deposition Process. Journal of Manufacturing Science and Engineering. 131, 051008-1-9. [Document Site]
El Kadiri, H., Wang, L., Gulsoy, H. O., Suri, P., Park, S. J., Hammi, Y., & German, R. (2009). Development of a Ti-based Alloy: Design and Experiment. JOM Journal of the Minerals, Metals and Materials Society. Springer Boston. 61(5), 60-66. [Document Site]
Horstemeyer, M., & El Kadiri, H. (2009). Jurassic Radiolarite Pulses, from the Dorsale Calcaire (Internal Rif, Morrocco): A Clue for Correlating and Interpreting the Tethyan Radiolarites. Stratigraphy. Micropaleontology Press. 6(4), 137-156. [Abstract]
Tucker, M.T., Horstemeyer, M., Gullett, P., El Kadiri, H., & Whittington, W. R. (2009). Anisotropic Effects on the Strain Rate Dependence of a Wrought Magnesium Alloy. Scripta Materialia. Amsterdam: Elsevier, Ltd.. 60(3), 182-185. [Abstract]
El Kadiri, H., Horstemeyer, M., & Bammann, D. (2008). A Theory of Stress-Driven Interfacial Damage upon Cationic Selective Oxidation of Alloys. In K. Bhattacharya and H. Gao (Eds.), Journal of Mechanics and Physics of Solids. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 56(12), 3392-3415. [Abstract]
El Kadiri, H., Wang, L., Horstemeyer, M., Shahbazian-Yassar, R., Berry, J., Felicelli, S. D., & Wang, P. (2008). Phase Transformations in Low-alloy Steel Laser Deposits. Materials Science and Engineering A. 494(1-2), 10-20. [Document]
Yassar, R. S., Murphy, J., Burton, C., Horstemeyer, M., El Kadiri, H., & Shokuhfar, T. (2008). Microstructure History Effect During Sequential Thermomechanical Processing. Matls. Sci. Eng. A.. 10, 1016.
El Kadiri, H., Horstemeyer, M., Jordon, J. B., & Xue, Y. (2008). Fatigue Crack Growth Mechanisms in High Pressure Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A. Springer Boston. 39(1), 190-205. [Abstract]
Xue, Y., Horstemeyer, M., McDowell, D. L., El Kadiri, H., & Fan, J. (2007). Microstructure-based Multistage Fatigue Modeling of a Cast AE44 Magnesium Alloy. International Journal of Fatigue. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 29(4), 666-676. [Abstract]
Xue, Y., El Kadiri, H., Horstemeyer, M., Jordon, J. B., & Weiland, H. (2007). Micromechanisms of Multistage Fatigue Crack Growth in a High-strength Aluminum Alloy. Acta Materialia. 55(6), 1975-1984. [Abstract]
El Kadiri, H., Xue, Y., Horstemeyer, M., Jordon, J. B., & Wang, P. (2006). Identification and Modeling of Fatigue Crack Growth Mechanisms in a Die-cast AM50 Magnesium Alloy. In Elsevier (Ed.), Acta Materialia. Elsevier Ltd, Oxford, OX5 1GB, United Kingdom. 54(19), 5061-5076. [Abstract]
El Kadiri, H., Bienvenu, Y., Solanki, K.N., Horstemeyer, M., & Wang, P. (2006). Creep and Tensile Behaviors of Fe-Cr-Al Foils and Laser MicroWelds at High Temperature. Materials Science and Engineering A, A421. 168-181. [Abstract] [Document]
El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2005). Abnormal High Growth Rates of Metastable Aluminas on FeCrAl Alloys. Oxidation of Metals. Springer Science and Business Media. 64(1), 63-97. [Abstract]
El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2005). Phase Transformation and Growth of Alumina on a Thin FeCrAl-RE Foil at around 900°C. Materials Science Forum. Les Embiez-France: Trans Tech Publications Ltd, Zurich-Ueticon, CH-8707, Switzerland. 461, 1107-1116. [Abstract]
El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2005). Influence of Laser Welding on the Alumina Growth on a Thin FeCrAl-RE Foil at High Temperature. Oxidation of Metals. Springer Science and Business Media. 64(1), 99-117. [Abstract]
El Kadiri, H., Molins, R., Bienvenu, Y., & Horstemeyer, M. (2004). High-Temperature Oxidation Behavior of Base Material and Laser-weld Specimens of a Thin FeCrAl-RE Foil at around 900°C. Materials Science Forum. Les Embiez, France: Trans Tech Publications Ltd, Zurich-Ueticon, CH-8707, Switzerland. 461, 1157-1164. [Abstract]
El Kadiri, H., Dahmen, M., Bienvenu, Y., Malot, T., & Horstemeyer, M. (2004). Laser Beam Welding of Metal-Supported Automotive Catalytic Converters. Proceedings of the 23rd International Congress of Applications of Lasers and Electro-Optics. 1, 1-10.
Peer-Reviewed Conference Abstracts
Imandoust, A., El Kadiri, H., Barrett, C. D., & Oppedal, A. L. (2016). The Predominant Dynamic Recrystallization Mechanism during Extrusion in RE-containing Mg Alloys. 6th International Conference on Recrystallization and Grain Growth. Omni William Penn Hotel.
Agnew, S. R., Wang, F., Barrett, C. D., & El Kadiri, H. (2016). Transmutation of Basal Dislocations through Twin Boundaries in Mg. International Journal of Plasticity. IJP International Conference on Plasticity, Damage, and Fracture. Keauhou Bay, HI.
Allen, R., Toth, L. S., Cherkaoui, M., McKenzie, K., Barrett, C. D., & El Kadiri, H. (2016). Slip-Twin Interactions at Interfaces in Crystal Plasticity. International Journal of Plasticity. IJP International Conference on Plasticity, Damage, and Fracture. Keauhou Bay, HI.
Barrett, C. D., & El Kadiri, H. (2016). Measurement of Disconnection Mobility via Generalized Interfacial Fault Energies. International Journal of Plasticity. IJP International Conference on Plasticity, Damage, and Fracture. Keauhou Bay, HI. [Abstract]
Baird, J., El Kadiri, H., Oppedal, A. L., Horstemeyer, M., & Vogel, S. C. (2011). Non-Schmid Effects of {10-12} Twinning and and Non-Basal Slip in Magnesium. 2011 TMS Annual Meeting & Exposition. San Diego, CA.
Oppedal, A. L., El Kadiri, H., Tomé, C. N., Baird, J., Vogel, S. C., Kaschner, G. C., & Horstemeyer, M. (2011). Hardening Mechanisms upon Profuse Twinning in Pure Magnesium. TMS 2011. San Diego, CA: TMS (The Minerals, Metals & Materials Society). [Abstract]
Oppedal, A. L., Horstemeyer, M., Oglesby, D., & El Kadiri, H. (2005). Magnesium Alloys with Temperature Dependence on Damage Evolution. MRS Fall Meeting 2005. MRS Fall Meeting 2005; Boston, MA.
Peer-Reviewed Conference Papers
Boostani, A. F., Mujahid, S., Oppedal, A. L., Krivanec, C., Whittington, W. R., Allison, P. G., Bhattacharyya, J. J., Agnew, S. R., & El Kadiri, H. (2019). Heat Treatment Strategies to Improve the Quasi-Static and Dynamic Performance of Alpha + Beta Titanium Alloys. TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. San Antonio, TX: Springer, Cham. DOI:10.1007/978-3-030-05861-6_131. [Abstract]
Boostani, A. F., Mujahid, S., Oppedal, A. L., Krivanec, C., Whittington, W. R., Allison, P., Bhattacharyya, J., Agnew, S., & El Kadiri, H. (2018). Heat Treatment of Alpha+Beta Titanium Alloys. MS&T proceeding (2018). Columbus, OH. 3. [Abstract]
Mujahid, S., Boostani, A. F., Oppedal, A. L., Krivanec, C., Whittington, W. R., Allison, P., Bhattacharyya, J., Agnew, S., & El Kadiri, H. (2018). Effect of Rapid Heat Treatment on the Microstructure of Alpha+Beta Titanium Alloys. MS&T 2018 Proceeding. Columbus, OH: TMS. 5. [Abstract]
Mujahid, S., Krivanec, C., Oppedal, A. L., Whittington, W. R., Allison, P., Boostani, A. F., Bhattacharyya, J. J., Agnew, S., & El Kadiri, H. (2018). Effect of Heat Treatment Processing on the Dynamic Performance of Alpha+Beta and Metastable-Beta Titanium Alloys. Proceedings of the 2018 SEM Annual Conference and Exposition. Greenville, SC: Society for Experimental Mechanics. [Abstract]
Wang, F., Barrett, C. D., Molodov, K. D., Al-Samman, T., Oppedal, A. L., Molodov, D. A., Kontsos, A., Ramesh, K. T., El Kadiri, H., & Agnew, S. R. (2017). The Effect of {10-12} Twin Boundary on the Evolution of Defect Substructure. In K. N. Solanki, D. Orlov, A. Singh, N. R. Neelameggham (Eds.), Magnesium Technology 2017. San Diego, CA: Springer International Publishing. 175-180. DOI:10.1007/978-3-319-52392-7_27. [Abstract] [Document Site]
Imandoust, A., & El Kadiri, H. (2016). Nucleation of Dynamic Recrystallization and Grain Growth in Hot Extruded Mg-Ce Alloys. Materials Science & Technology 2016. Materials Science & Technology 2016.
El Kadiri, H., & Barrett, C. D. (2016). {10-12} Twinning Supremacy. International Materials Research Congress. IMRC - Mexico. [Abstract]
Bhattacharyya, J., Agnew, S. R., Wu, P., Whittington, W. R., & El Kadiri, H. (2015). Materials Science and Engineering, University of Virginia, Charlottesville, VA 22904, USA. Magnesium Technology. TMS/Orlando, FL: John Wiley & Sons.
Mamivand, M., Asle Zaeem, M., & El Kadiri, H. (2013). Phase Field Modeling of Stress Induced Tetragonal to Monoclinic Transformation in Zirconia. MS&T. Montreal, Canada.
Mamivand, M., Asle Zaeem, M., & El Kadiri, H. (2013). Phase Field Modeling of Tetragonal to Monoclinic Phase Transformation at Zirconium Oxide. TMS Annual Meeting & Exhibition. San Antonio, USA..
Baird, J., El Kadiri, H., Oppedal, A. L., Kapil, J., Ma, Q., & Vogel, S. C. (2012). Effect of Grain Boundary Misorientation on the Asymmetry, Anisotropy, and Nucleation Stresses of the {10-12} Twinning and Non-basal Slip in Magnesium. Proceedings of Mg2012: 9th International Conference on Magnesium Alloys and their applications. Vancouver, BC Canada. [Abstract] [Document]
Baird, J., Li, B., Parast, S., Horstemeyer, M., Horstemeyer, S., El Kadiri, H., & Wang, P. (2012). Anomalous Twin Bands in AZ31 Magnesium Sheet Bending. Magnesium Technology. Orlando, FL.
Ma, Q., Li, B., Oppedal, A. L., Whittington, W. R., Horstemeyer, S., Marin, E., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). Effect of Strain Rate on Dynamic Recrystallization in a Magnesium Alloy under Compression at High Temperature. Magnesium Technology 2012, Proceddings of 2012 TMS Annual Meeting and Exhibition. Orlando, FL.
Barrett, C. D., El Kadiri, H., & Tschopp, M. A. (2011). Influence of Stress State on Single Crystal Deformation in Magnesium. Plasticity 2012 Conference Proceedings. Plasticity 2012.
Asle Zaeem, M., El Kadiri, H., Horstemeyer, M., & Wang, P. (2011). The Roles of Grain Boundary Energy Anisotropy and Second-Phase Particles on Grain Growth in Polycrystalline Materials. 4th Int. Multi-Conference on Eng. and Tech. Innovation. Orlando, USA. 180-182.
Kim, S., El Kadiri, H., & Horstemeyer, M. (2011). Nucleation Mechanism for Shuffling Dominated Twinning in Magnesium. Proceedings of the 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]
Asle Zaeem, M., El Kadiri, H., Mesarovic, S. D., Wang, P., & Horstemeyer, M. (2011). A Finite Element-Phase Field Study of Solid State Phase Transformation: Coarsening of Coherent Precipitates and Instability of Multilayer Thin Films. TMS 2011 Annual Meeting & Exhibition. San Diego, CA. [Abstract]
Barrett, C. D., Tschopp, M. A., El Kadiri, H., & Li, B. (2011). Influence of Crystallographic Orientation on Twin Nucleation in Single Crystal Magnesium. TMS 2011 Proceedings. TMS 2011, San Diego, CA. [Abstract] [Document]
Oppedal, A. L., El Kadiri, H., Tomé, C. N., Baird, J., Vogel, S. C., & Horstemeyer, M. (2011). Limitation of Current Hardening Models in Predicting Anisotropy by Twinning in Hcp Metals: Application to a Rod-Textured AM30. In W. H. Sillekens, S. R. Agnew, N. R. Neelameggham, S. N. Mathaudhu (Eds.), Magnesium Technology 2011. San Diego, CA: TMS (The Minerals, Metals & Materials Society). 313-320. [Document]
Ma, Q., El Kadiri, H., Oppedal, A. L., Baird, J., & Horstemeyer, M. (2010). Twinning Multiplicity in an AM30 Magnesium Alloy Under Uniaxial Compression. Magnesium Technology 2011, 301-305. Proceddings of 2011 TMS Annual Meeting and Exhibition. San Diego, CA.
Bernard, J.D., Jordon, J. B., Horstemeyer, M., & El Kadiri, H. (2010). Structure-Property Evaluation of Fatigue Damage in a Magnesium AM30 Alloy. 2010 TMS Annual Meeting and Exhibition. TMS 2010 Seattle, WA. [Abstract]
Ma, Q., El Kadiri, H., Horstemeyer, M., & Wang, P. (2010). Plasticity in a Rod-Textured Extruded Mg AM30 Alloy. Magnesium Technology 2010, 57-62. Proceddings of 2010 TMS Annual Meeting and Exhibition. Seattle, Washington, USA.
El Kadiri, H., & Oppedal, A. L. (2009). Transmutation and Accommodation Effects by Glide Twinning. Magnesium Technology 2010. 2010 TMS Annual Meeting & Exhibition; Seattle, WA: TMS. [Abstract]
Wang, L., Pratt, P., Felicelli, S. D., El Kadiri, H., Wang, P., & Horstemeyer, M. (2009). Experimental Analysis of Porosity Formation in Laser-assisted Powder Deposition Process. Supplemental Proceedings: Volume 1: Fabrication, Materials Processing and Properties. TMS, Warrendale, PA. 389-396. [Document]
Stone, T.W., Tucker, L., Williams, T. N., Hammi, Y., El Kadiri, H., & Horstemeyer, M. (2008). Comparison of Density Measurement Techniques for Large P/M Components. Advances in Powder Metallurgy & Particulate Materials. Princeton, NJ: Metal Powder Industries Federation. 11-84-11-96. [Abstract]
Potirniche, G., Middleton, J., Gomez, R., Bain, B., El Kadiri, H., Rhee, H., Williams, T. N., Wang, P., & Horstemeyer, M. (2007). A Study of Monotonic and Cyclic Properties of Lens Fabricated 4140 and AISI 4140 Steel Alloys. Materials Processing and Manufacturing Division Symposium. Orlando, Fl.
Potirniche, G., Middleton, J., El Kadiri, H., Rhee, H., Wang, P., & Horstemeyer, M. (2007). Fatigue Damage in Laser Engineered Net Shaping Manufactured Materials. TMS 2007 Annual Meeting & Exhibition. Orlando, Fl.
Xue, R., El Kadiri, H., Horstemeyer, M., Fan, J., & McDowell, D. L. (2006). Fatigue and Fracture Mechanism of Cast AE44 Magnesium Alloys. Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. St. Louis, MO.
Wang, P., El Kadiri, H., & Horstemeyer, M. (2006). Fracture Behavior of Al-Mg Alloys Deformed at Elevated Temperature. 47th AIAA/ASME/ASCE/AHS/ASC Structure, structure Dynamics, and Materials Conference. Newport, RI.
Wang, P., Potirniche, G., El Kadiri, H., & Horstemeyer, M. (2006). Modeling 3D Damage Progression of Laser Deposited Materials. SPIE Defense and Security Symposium. Orlando, Fl.
Wang, P., El Kadiri, H., Potirniche, G., & Horstemeyer, M. (2006). Characterization and Modeling of 3-Dimensional Damage Progression of Laser-Deposited Iron-based Materials Using X-ray Tomography. 2006 TMS Annual Meeting and Exhibition. San Antonio, Tx.
Non-Refereed Conference Posters
Rhodes, C., Tschopp, M. A., & El Kadiri, H. (2010). Grain Boundary Structure and Energy in Magnesium. 2010 Undergraduate Research Symposium. MSU.
Barrett, C. D., Tschopp, M. A., & El Kadiri, H. (2010). Atomistic Simulations of Twin Nucleation in Single Crystal Mg. 2010 Undergraduate Research Symposium. MSU.
In-House
Horstemeyer, M., Oglesby, D., Fan, J., Gullett, P., El Kadiri, H., Xue, Y., Burton, C., Gall, K., Jelinek, B., Jones, M. K., Kim, S., Marin, E., McDowell, D. L., Oppedal, A. L., & Yang, N. (2007). From Atoms to Autos: Designing a Mg Alloy Corvette Cradle by Employing Hierarchical Multiscale Microstructure-Property Models for Monotonic and Cyclic Loads. USCAR_ MSU.CAVS.CMD.2007-R0001.
Technical Report
Marin, E., Bouvard, C., Ma, Q., Oppedal, A. L., El Kadiri, H., Hammi, Y., & Li, B. (2011). Multiscale Material Models and Design Framework for Lightweight Alloys. DOE/SRCLID Quarterly Report Phases III and IV: CAVS/Mississippi State.
Ma, Q., Marin, E., Hammi, Y., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). On Predicting the Channel Die Compression Behavior of HCP Magnesium AM30 Using Crystal Plasticity FEM. CAVS REPORT, MSU.CAVS.CMD.2011-R004: CAVS, MSU.
Marin, E., Bouvard, C., Ma, Q., Oppedal, A. L., El Kadiri, H., Hammi, Y., & Li, B. (2011). Multiscale Material Models and Design Framework for Lightweight Alloys. DOE/SRCLID quarterly report phases III and IV: CAVS/Mississippi State.
Marin, E., Bouvard, C., Ma, Q., Oppedal, A. L., & El Kadiri, H. (2011). Multiscale Material Models and Design Framework for Lightweight Alloys. DOE/SRCLID quarterly report phases III and IV: CAVS/Mississippi State.
Marin, E., El Kadiri, H., Lowry, A., Wang, P., & Horstemeyer, M. (2008). MSU.CAVS.CMD.2008-R002: Modeling the Hot Forging of Nickel-Based Superalloys: IN718 and IN718Plus. [Abstract]
Professional Presentations
Barrett, C. D., El Kadiri, H., & Moser, R. (2017). Generalized Interfacial Fault Energies. MS&T 2017. Pittsburg, PA.
Asle Zaeem, M., El Kadiri, H., Wang, P., & Horstemeyer, M. (2011). A Phase-Field Model for Recrystallization Grain Growth: Effects of Grain Boundary Energy Anisotropy and Second-Phase Particles. TMS 2011 Annual Meeting & Exhibition. [Abstract]
Tschopp, M. A., Barrett, C. D., & El Kadiri, H. (2011). Influence of Crystallographic Orientation on Twin Nucleation in Single Crystal Magnesium. TMS 2011; San Diego, CA. [Document]
Li, B., Zhang, X. Y., El Kadiri, H., & Horstemeyer, M. (2011). Twinning without a Twinning Plane. TMS Annual Meeting. San Diego: TMS.
Kim, S., El Kadiri, H., & Horstemeyer, M. (2011). Nucleation Mechanism for Shuffling Dominated Twinning in Magnesium. 2011 TMS Annual Meeting & Exhibition. San Diego, CA. [Abstract]
Barrett, C. D., Tschopp, M. A., El Kadiri, H., & Li, B. (2011). Influence of Crystallographic Orientation on Twin Nucleation in Single Crystal Magnesium. TMS. San Diego: TMS.
Wang, L., Pratt, P., Felicelli, S. D., El Kadiri, H., Wang, P., & Horstemeyer, M. (2009). Experimental Analysis of Porosity Formation in Laser-assisted Powder Deposition Process. 2009 TMS Annual Meeting & Exhibition, Materials Issues in Additive Powder-Based Manufacturing Processes, San Francisco, CA.
Wang, L., Pratt, P., Felicelli, S. D., Hubbard, S. D., Berry, J., & El Kadiri, H. (2008). Residual Stresses in LENS Deposited AISI 410 Stainless Steel Plates. 2008 TMS Annual Meeting & Exhibition, Symposium on Neutron and X-Ray Studies for Probing Materials Behavior,. New Orleans, LA.
Wang, P., Felicelli, S. D., Horstemeyer, M., Wang, L., Xue, Y., El Kadiri, H., & Potirniche, G. (2008). Simulation-Based Integration of Rapid Solidification to Fatigue Prognostic Predictions Using Laser-Deposited High Strength Materials as an Example. 9th Global Innovations Symposium: Trends in Integrated Computational Materials Engineering for Materials Processing and Manufacturing: Session II, 2008 TMS Annual Meeting & Exhibition, . New Orleans, LA.
Wang, L., El Kadiri, H., Felicelli, S. D., Wang, P., & Gady, B. (2007). Modeling of Microstructure Evolution during LENS Deposition. SPIE International Defense and Security Symposium, Modeling and Simulation for Military Operations II. Orlando, FL. [Document]
El Kadiri, H., Wang, L., Felicelli, S. D., Horstemeyer, M., & Wang, P. (2007). Transformations in Laser Multi-deposited Medium Carbon Steel. Advances in Microstructure-based Modeling and Characterization of Deformation Microstructures. Orlando, FL: TMS (The Minerals, Metals & Materials Society).
El Kadiri, H., & Horstemeyer, M. (). Transient Oxidation and Interfacial Cavitation Upon Selective Oxidation. In MS&T 2007 Symposium: Oxidation and Diffusion, chaired by David R. Clarke (Eds.), Detroit, Mi.
Patents and Licenses
Horstemeyer, M., Wang, P., Felicelli, S. D., El Kadiri, H., Berry, J., & Bammann, D. (2007). LENS Modeling System Modification 5, $1.65MM,.