Lee, J., Nouranian, S., Torres, G.W., Lacy, T., Toghiani, H., Pittman, C., & DuBien, J.L. (May 2013). Characterization, Prediction, and Optimization of Flexural Properties of Vapor-Grown Carbon Nanofiber/Vinyl Ester Nanocomposites by Response Surface Modeling. Journal of Applied Polymer Science DOI: 10.1002/app.39380, -. [Abstract][Document Site]
Garrison, T., & Williams, C. (Apr 2013). Impact of Relevance and Distraction on Driving Performance and Visual Attention in a Simulated Driving Environment. Applied Cognitive Psychology Wiley-Blackwell, 27(3), 396-405.
Ma, Q., Mao, W., Li, B., Wang, P., & Horstemeyer, M. (Apr 2013). Substructure and Texture Evolution in an Annealed Aluminum Alloy at Medium Strains. Metallurgical and Materials Transactions A, Springer, in press. [Abstract]
Torres, G.W., Nouranian, S., Lacy, T., Toghiani, H., Pittman, C., & DuBien, J.L. (Apr 2013). Statistical Characterization of the Impact Strengths of Vapor-grown Carbon Nanofiber/Vinyl Ester Nanocomposites Using a Central Composite Design. Journal of Applied Polymer Science, 128(2), 1070-1080. [Abstract][Document Site]
Nouranian, S., Lacy, T., Toghiani, H., Pittman, C., & DuBien, J.L. (Mar 2013). Response Surface Predictions of the Viscoelastic Properties of Vapor-Grown Carbon Nanofiber/Vinyl Ester Nanocomposites. Journal of Applied Polymer Science, DOI: 10.1002/app.39041, -. [Abstract][Document Site]
Bammann, D., & Enakoutsa, K. (Mar 2013). Modeling the Dynamic Failure of Railroad Tank Cars Using a Physically Motivated Internal State Variable Plasticity/Damage Nonlocal Model. Modelling and Simulation in Engineering, Volume , Article ID 815158, 11 pages, 2013 (2013), 11 pages.
Florea, R. S., Bammann, D., Solanki, K.N., & Hammi, Y. (Mar 2013). Welding Parameters Influence on Fatigue Life and Microstructure in Resistance Spot Welding of 6061-T6 Aluminum Alloy. Materials & Design, 45, 456-465. [Abstract]
Nouranian, S., Lee, J., Torres, G.W., Lacy, T., Toghiani, H., & Pittman, C. (Mar 2013). Effects of Moulding Condition and Curing Atmosphere on the Flexural Properties of Vinyl Ester. Polymers and Polymer Composites, 21(2), 61-64. [Abstract][Document Site]
Rouhi, M., Rais-Rohani, M., & Najafi, A. (Feb 2013). Probabilistic Analysis and Optimization of Energy Absorbing Components Made of Nanofiber Enhanced Composite Materials. Composite Structures Elsevier, 100, 144-153.
Bouvard, J.-L., Francis, D.K., Tschopp, M. A., Marin, E., Bammann, D., & Horstemeyer, M. (Jan 2013). An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation. International Journal of Plasticity, 42, 168--193. [Abstract][Document Site]
Strawderman, L., Huang, Y., & Garrison, T. (Jan 2013). The Effect of Design and Placement of Work Zone Warning Signs on Driver Speed Compliance: A Simulator-based Study. IIE Transactions on Occupational Ergonomics and Human Factors Institute of Industrial Engineers, 1(1), 66-75.
Sadasivuni, R., Cooke, W. H., & Bhushan, S. (Jan 2013). Wildfire Risk Prediction in Southeastern Mississippi Using Population Interaction. Ecological Modeling, 251, 297-306.
Rouhi, M., & Rais-Rohani, M. (Jan 2013). Modeling and Probabilistic Design Optimization of a Nanofiber-Enhanced Composite Cylinder for Buckling. Composite Structures Elsevier, 95, 346-353.
Chow, J.P., Simionescu, D.T., Warner, H., Wang, B., Patnaik, S., Liao, J., & Simionescu, A. (Jan 2013). Mitigation of Diabetes-related Complications in Implanted Collagen and Elastin Scaffolds Using Matrix-binding Polyphenol. Biomaterials, 34(3), 685–695. [Abstract][Document Site]
Peer-Reviewed Conference Papers
AbuOmar, O., Nouranian, S., & King, R. (May 2013). Artificial Neural Networks Modeling of the Viscoelastic Properties of Vapor-Grown Carbon Nanofiber/Vinyl Ester Nanocomposites. The 19th International Conference on Composite Materials (ICCM19), July 28-August 2, 2013, Montreal, Quebec, Canada. [Document]
Simsiriwong, J., Sullivan, R. W., Lacy, T., Pittman, C., Toghiani, H., DuBien, J.L., & Nouranian, S. (Apr 2013). Creep Compliance Characterization of Vapor-Grown Carbon Nanofiber/Vinyl Ester Nanocomposites Using a Central Composite Design of Experiments. Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Apr 8-11, 2013, Boston, MA. [Abstract][Document Site]
Ma, Q., Li, B., Oppedal, A. L., Wang, P., Luo, A., & Horstemeyer, M. (Apr 2013). An Experimental and Numerical Study of the Microstructural and Mechanical Properties of an Extruded Magnesium Alloy at 450 &Deg;C and Varied Strain Rates. SAE Technical Paper, Detroit, MI: SAE International. [Abstract]
Ma, Q., Horstemeyer, S., Li, B., Wang, P., & Horstemeyer, M. (Apr 2013). Microstructure and Texture Evolution in a Magnesium Alloy during Extrusion at Various Extrusion Speeds. Magnesium Technology, TMS 2013, San Antonio, TX, USA, 95-99.
Ma, Q., Mao, W., Li, B., Wang, P., & Horstemeyer, M. (Apr 2013). Grain Subdivision and Its Effect on Texture Evolution in an Aluminum Alloy under Plane Strain Compression. Light Metals, TMS 2013, San Antonio, TX USA, 351-356.
Li, B., Horstemeyer, S., Oppedal, A. L., Wang, P., & Horstemeyer, M. (Mar 2013). Inverse Strain Rate Sensitivity of Bendability of an AZ31 Sheet in Three-point Bending. In N. Hort, S. N. Mathadhu, N. R. Neelameggham, M. Alderman (Eds.), Magnesium Technology 2013, San Antonio, TX: John Wiley & Sons, Inc., Hoboken, NJ, USA. [Document]
Tschopp, M. A., Oppedal, A. L., Miller, J.D., Groeber, M.A., Rosenberger, A.H., & Solanki, K.N. (Mar 2013). Characterizing Primary Dendritic Microstructures to Quantify the Processing-structure-property Relationship in Single Crystal Nickel Based Superalloys. In Jian-Yang Hwang, Chengguang Bai, John Carpenter, Shadia J. Ikhmayies, Bowen Li, Sergio Neves Montiero, Zhiwei Peng, and Mingming Zhang (Eds.), Characterization of Minerals, Metals, and Materials 2013, San Antonio, TX: TMS (The Minerals, Metals & Materials Society), 299-310. [Abstract]
Bertucci, R., Liao, J., & Topsakal, E. (Jan 2013). Porcine Models in Telemetry: Hydration Effects and Tissue Storage Protocol. URSI National Radio Science Meeting, Boulder, Boulder, CO.
Jelinek, B., Solanki, K.N., Peters, J.F., & Felicelli, S. D. (Jan 2013). Investigating Robustness of Interatomic Potentials with Universal Interface. Journal of Physics: Conference Series, Gatlinburg, TN: Institute of Physics (IOP). [Abstract][Document]
Book or Book Chapter
Jelinek, B., & Felicelli, S. D. (Feb 2013). A Three-Dimensional Lattice Boltzmann-Cellular Automaton Model for Dendritic Solidification Under Convection. TMS2013 Supplemental Proceedings John Wiley & Sons, Inc. [Document Site]
Banicescu, I., Ciorba, F. M., & Srivastava, S. (Feb 2013). Performance Optimization of Scientific Applications Using an Autonomic Computing Approach. Scalable Computing and Communications: Theory and Practice John Wiley and Sons, 437-467.
Jelinek, B., & Felicelli, S. D. (Jan 2013). Large Scale Parallel Lattice Boltzmann Model of Dendritic Growth. EPD Congress 2013 John Wiley & Sons, Inc. [Document Site]
Jelinek, B., & Felicelli, S. D. (Mar 2013). A Three-Dimensional Lattice Boltzmann-Cellular Automaton Model for Dendritic Solidification under Convection. , San Antonio, TX: TMS. [Abstract]
SalemeRuiz, K. (May 2013). 2013 NSF Summer Institute Fellowship Materials Genome Short Course. , Evanston, IL: Northwestern University. [Abstract][Document Site]
SalemeRuiz, K. (May 2013). IMA Summer Graduate Student Program on Flow, Geometric Motion, Deformation and Mass Transport in Physiological Processes. , University of Minnesota: Institute for Mathematics and its Applications. [Abstract][Document Site]
Peer-Reviewed Conference Abstracts
Tang, T. (Mar 2013). Multiscale Computational Homogenization for Thermoelastoplastic Behavior and Damage Evolution in Metal Matrix Composites. 12th U.S. National Congress on Computational Mechanics, Raleigh, NC.
SalemeRuiz, K., & Stone, T.W. (Apr 2013). Computational Modeling of Brittle Polycrystalline Materials Based on Discrete Element Method. ERDC Interim Report #2, Mississippi State University: Center for Advanced Vehicular Systems, 1(1), 1-52. [Abstract]
Jelinek, B., & Felicelli, S. D. (Apr 2013). Progress Report for March 2013. , ERDC: CAVS, Mississippi State University.
Jelinek, B., Felicelli, S. D., (Mar 2013). Progress Report for February 2013. , CAVS, Mississippi State University: ERDC.
Jelinek, B., Felicelli, S. D., (Feb 2013). Progress Report for January 2013. , CAVS, Mississippi State University: ERDC.
Felicelli, S. D., Tang, T., (Feb 2013). WD 0039-Simulations of Thermal Signature of Tires and Tracks. , Mississippi State University: CAVS.
Jelinek, B., Felicelli, S. D., (Jan 2013). Progress Report for December 2012. , ERDC: CAVS, Mississippi State University.
SalemeRuiz, K., & Stone, T.W. (Jan 2013). Method for Digitally Generating the Microstructure for Brittle and Layered Biomaterials. ERDC Interim Report #1, Mississippi State University: Center for Advanced Vehicular Systems, 1(1), 1-30. [Abstract]
